Ultra-Drive Countersunk Security Self Tapping Screws (UL04)

Countersunk head security self-tapping screws in the Ultra-Drive 2-way reusable pin-in-hexalobular drive, sheet-metal thread sizes No.2–No.14 in stainless steel — flush-finish reusable security fixing that forms its own thread in sheet, the pairing of a prepared countersink with a thread-forming thread.

Last updated: 2026-11

Request a Quote

Ultra-Drive Countersunk Security Self Tapping Screws (UL04) in an industrial setting
Illustrative image redrawn from real Ultra-Drive Countersunk Security Self Tapping Screws (UL04) product references — not a photograph of stocked items.

Specifications

UL04 closes out the Ultra-Drive four-SKU matrix: the countersunk head of UL02 combined with the self-tapping thread of UL03. The use case is a flush security finish in sheet that has never been tapped — cabinet doors, ducting access panels, railway and transport interiors, anywhere a protruding head is a snag hazard or a vandalism handle and the base material is thin enough that thread-forming beats tapping. The sheet-metal thread runs No.2–No.14 and the manufacturer lists stainless steel as the material; the head is drawn to the 90° countersink, which must exist in the mating part — in thin sheet that usually means a punched or drilled countersink at fabrication, not on site. Driving discipline matters more here than on the machine-thread SKUs: the screw must form its thread and pull the head to the seat in one controlled stroke, so torque setting and pilot hole size are part of the installation specification, and the matched Ultra-Drive bit is ordered with the screws. Get the four SKUs in one view and the choice is mechanical: button or countersunk head, machine or sheet thread, all sharing one 2-way reusable drive system.

Line / SKU Ultra-Drive UL04 — countersunk head security self-tapping screw, 2-way reusable
Drive Pin-in-hexalobular security recess (2-way: same driver installs and removes; standard Torx/hex drivers blocked by the centre pin)
Thread range No.2 – No.14 sheet-metal self-tapping thread; pilot hole per thread-forming practice
Head form Countersunk head, 90° included angle; per-size dimensions tabulated by the manufacturer
Materials Stainless steel
Reusability Reusable — designed for repeated install/remove cycles by authorised holders of the drive bit

Materials

  • Stainless steel (A2/A4 class confirmed at quotation)

Ordering & documentation

Documents

Shipments of Ultra-Drive Countersunk Security Self Tapping Screws (UL04) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Ultra-Drive Countersunk Security Self Tapping Screws (UL04) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Ultra-Drive Countersunk Security Self Tapping Screws (UL04)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for ultra-drive countersunk security self tapping screws (ul04) is 10,000 pieces (applies to the standard sizes and finishes for ultra-drive countersunk security self tapping screws (ul04); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for ultra-drive countersunk security self tapping screws (ul04) run 3–7 days. Quantities or variants of ultra-drive countersunk security self tapping screws (ul04) outside the standard range are confirmed at quotation.

Storage & shipping

Ultra-Drive Countersunk Security Self Tapping Screws (UL04) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store ultra-drive countersunk security self tapping screws (ul04) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Can UL04 be driven into an unprepared hole?

The thread will form in plain sheet with a correct pilot hole, but the countersunk head needs a 90° seat to sit flush — driven into an uncountersunk hole it stands proud and loses the flush finish that motivates the SKU. Prepare the countersink at fabrication, or choose button-head UL03 when the sheet stays plain.

What should an RFQ for UL04 screws state?

Sheet-thread size (No.2–No.14), length, base-material type and thickness for the thread-form confirmation, the countersink angle in the mating part (90° for this head form), material class, quantity per size, and drive bits with the order. Per-size head dimensions are confirmed with the quotation.

What is the MOQ and lead time for Ultra-Drive security screws?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Confirm the exact schedule against quantity and size mix at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Ultra-Drive Countersunk Security Self Tapping Screws (UL04) inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your Ultra-Drive Countersunk Security Self Tapping Screws (UL04)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.