DIN 965 Cross Recessed Countersunk Machine Screws

Cross recessed countersunk flat head machine screws per DIN 965 — current norm DIN EN ISO 7046-1/7046-2 — M1.6 to M10 in steel class 4.8 or A2/A4 stainless, thread 6g. The flush-head screw that takes a Phillips driver: the default countersunk machine screw of volume assembly.

Last updated: 2026-11

Request a Quote

DIN 965 Cross Recessed Countersunk Machine Screws in an industrial setting
Illustrative image redrawn from real DIN 965 Cross Recessed Countersunk Machine Screws product references — not a photograph of stocked items.

Specifications

Where DIN 963 keeps the single slot, DIN 965 puts a cross recess in the same 90° countersunk head — the flush seat stays, and the driver gains centring, so powered drivers can run the screw without cam-out at production speeds. The collected standard table runs M1.6 through M10 in steel class 4.8, A2 or A4 stainless, thread tolerance 6g. At M4 the head seats at 7.5 mm maximum diameter (7.14 mm minimum) with a 2.2 mm head height, a No. 2 cross recess (Type H depth ≈4.4 mm) and a minimum thread length of 22 mm — longer screws are partially threaded, shorter ones fully. DIN 965's current norm is DIN EN ISO 7046 (parts 1 and 2 by property class). It is the natural partner to the DIN 963 slot form when the assembly line or the repair bench uses cross-recess tooling; see that page for the slotted route.

Standard DIN 965 — cross recessed countersunk flat head screw; current norm DIN EN ISO 7046-1/7046-2
Size range M1.6 – M10
Dimensions at M4 dk (head diameter) nominal=max 7.5 mm (min 7.14 mm); k (head height) max 2.2 mm; cross recess No. 2, Type H m ≈4.4 mm; b (thread length) min 22 mm; P 0.7 mm
Dimensions at M5 dk nominal=max 9.2 mm (min 8.84 mm); k max 2.5 mm; cross recess No. 2; b min 25 mm
Strength / materials Steel 4.8; stainless A2, A4
Thread 6g
dk at M4 nominal=max 7,5 (min 7,14)
k at M4 max 2,2
Dimensions at M4 cross recess no
Collected specification records
Grade Field Recorded value
machine-screw Thread definition Uniformly threaded; designed to thread into likewise uniformly threaded nuts or tapped holes; nominal diameter 1/4 in or less

Industry reference — figures as printed in the collected technical tables; availability confirmed per quotation.

Materials

  • Steel
  • Stainless steel

Ordering & documentation

Documents

Shipments of DIN 965 Cross Recessed Countersunk Machine Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 965 Cross Recessed Countersunk Machine Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 965 Cross Recessed Countersunk Machine Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for din 965 cross recessed countersunk machine screws is 10,000 pieces (applies to the standard sizes and finishes for din 965 cross recessed countersunk machine screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 965 cross recessed countersunk machine screws run 3–7 days. Quantities or variants of din 965 cross recessed countersunk machine screws outside the standard range are confirmed at quotation.

Storage & shipping

DIN 965 Cross Recessed Countersunk Machine Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 965 cross recessed countersunk machine screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

DIN 965 or DIN 963 — same head, which drive should I pick?

The heads are dimensionally interchangeable — both seat in the same 90° countersink, and the collected tables give the M4 countersunk head the same 7.5 mm diameter and 2.2 mm height. What differs is the drive and the line it buys you: the DIN 965 cross recess centres the driver and resists cam-out under a powered screwdriver, which is why volume assembly specifies it; the DIN 963 slot is serviceable with any flat blade and remains the traditional callout in instruments, terminals and restoration. Order the drive your tooling and drawing use — changing later costs only the driver, not the countersink.

Why does the table list ISO 7046 in two parts?

The collected DIN 965 page names DIN EN ISO 7046-1 and 7046-2 as its current norms. The two parts split the same countersunk head geometry by property class — one part for the 4.8-class steel screws the DIN table carries, the other for the stainless and non-ferrous grades. For procurement the practical rule is unchanged: order the DIN 965 designation your documentation prints and state the property class or stainless grade explicitly, and the part covers either part of the ISO standard.

What is the MOQ and lead time for these machine screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these machine screws state?

State the standard designation (for example DIN 965, DIN 964, DIN 966 — or the ISO designation your drawing prints, such as ISO 7046, ISO 2010 or ISO 7047), thread size and pitch, length and head dimension, strength class or material (such as 4.8, A2-70, A4-80 or brass), finish (black oxide, zinc plated, or plain), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 965 Cross Recessed Countersunk Machine Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your DIN 965 Cross Recessed Countersunk Machine Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.