DIN 906 Hexagon Socket Pipe Plugs (Taper Thread)
DIN 906 pipe plugs with hexagon socket and taper thread, M8 to M60 with R pipe-thread alternatives — the flush metal-to-metal seal plug for closed ports in hydraulic, pneumatic and machine housings — with the full collected table: plug length, socket width and engagement depth per size.
Last updated: 2026-11
Specifications
DIN 906 is the classic port-sealing plug: a short plug with a hexagon socket in its face and a taper thread that seals metal-to-metal into a tapped port, leaving nothing protruding to catch and no gasket to age. The taper is the seal — the plug's tapered thread wedges into the matching tapped hole so the sealing pressure rises with tightening torque — which is why this plug dominates hydraulic manifolds, pump housings, gearboxes and any casting with machined R-thread ports where a soft seal would limit temperature or chemical resistance. The collected table runs an unusually wide range, M8 to M60 in parallel rows, and for each size tabulates: the coarse or fine pitch P (larger sizes carry both options in separate rows), the R pipe-thread designation where a tapered pipe-thread variant exists for the same plug length (R 1/8 at M10, R 1/4 at M12, through R 1 1/2 at M48), the plug length L as a Nominal (js16) with max/min limits — the dimension that sets how flush the plug sits — the hex socket width s as Nominal (D12) with max/min limits, the socket engagement depth t minimum, and the weight per 1000 units. Materials and finishes are not printed by the collected specification and follow the drawing callout.
| Standard | DIN 906 — hexagon socket pipe plugs with taper thread |
|---|---|
| Series | M8 – M60 (metric taper rows), with R pipe-thread variants (R 1/8 to R 1 1/2) in the same body sizes |
| Tabulated geometry | Per size: pitch P (coarse and fine rows), R pipe-thread designation where tabulated, plug length L (Nominal js16 / max / min), hex socket width s (Nominal D12 / max / min), socket depth t min, weight per 1000 units |
| Dimensions at M10 | P coarse 1; R variant 1/8; L nominal 8 (max 8.45 / min 7.55); s nominal 5 (max 5.15 / min 5.03); t min 4; weight 3.38 kg/1000 |
| Dimensions at M20 | P coarse 1.5; R variant 1/2; L nominal 10 (max 10.45 / min 9.55); s nominal 10 (max 10.19 / min 10.04); t min 5; weight 17.6 kg/1000 |
| Dimensions at M36 | P coarse 1.5 / fine 2; L nominal 15 (max 15.55 / min 14.45); s nominal 19 (max 19.275 / min 19.065); t min 7.5; weight 85.2 kg/1000 |
| Dimensions at M48 | P coarse 1.5 / fine 2; R variant 1 1/2; L nominal 20 (max 20.65 / min 19.35); s nominal 24 (max 24.275 / min 24.065); t min 11.5; weight 214 kg/1000 |
| Materials / strength | Not tabulated by the collected specification — per RFQ (material and finish per drawing callout) |
Materials
- Material and finish specified per RFQ — the collected specification table covers geometry only
Ordering & documentation
Documents
Shipments of DIN 906 Hexagon Socket Pipe Plugs (Taper Thread) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 906 Hexagon Socket Pipe Plugs (Taper Thread) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 906 Hexagon Socket Pipe Plugs (Taper Thread)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for din 906 hexagon socket pipe plugs (taper thread) is 10,000 pieces (applies to the standard sizes and finishes for din 906 hexagon socket pipe plugs (taper thread); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 906 hexagon socket pipe plugs (taper thread) run 3–7 days. Quantities or variants of din 906 hexagon socket pipe plugs (taper thread) outside the standard range are confirmed at quotation.
Storage & shipping
DIN 906 Hexagon Socket Pipe Plugs (Taper Thread) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 906 hexagon socket pipe plugs (taper thread) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Taper thread (DIN 906) or cylindrical thread with sealing washer (DIN 908)?
The seal mechanism decides. DIN 906's taper thread seals by wedging metal into the tapped port — no consumables, highest temperature and chemical tolerance, but the port itself must be machined for taper thread and repeated re-installation wears the interference. DIN 908 uses a cylindrical thread with a sealing washer under its head: it seats against a flat machined face, tolerates repeated removal without port wear, and controls the seal through the washer choice instead of the thread fit. Compare the DIN 908 page on this site for the cylindrical variant — its collected table covers M10 to M64 with the washer-seat geometry. Practically: cast hydraulic ports threaded for R taper take DIN 906; flat-faced pump and gearbox ports take DIN 908; the two are not interchangeable on the same machined port.
Why are there both coarse and fine pitch rows for the larger metric sizes?
The collected table prints coarse and fine pitch options for the same plug body from the mid sizes upward (for example M36 with P 1.5 coarse and P 2 fine). Fine pitch is the common choice on thin-wall housings and hydraulic ports: a finer thread gives more turns of engagement in the same depth, better resistance to loosening under vibration, and finer torque control for the tapered interference that does the sealing. The plug length L, socket width s and depth t stay the same across the thread options, so the port drawing — not the plug — is what fixes which pitch is ordered. State the pitch explicitly at quotation whenever the port is tapped to fine pitch.
What is the MOQ and lead time for these screws?
Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 906 Hexagon Socket Pipe Plugs (Taper Thread) inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your DIN 906 Hexagon Socket Pipe Plugs (Taper Thread)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support