ISO 7045 Pan Head Screws with Cross Recess (H or Z)
ISO 7045 pan head screws with cross recess (Phillips-type H or Pozidriv-type Z), M1.6 to M10 — the small-screw workhorse of electronics and appliance assembly — with the full collected 10-size table: head geometry, recess number and penetration depths for both recess series, and thread lengths.
Last updated: 2026-11
Specifications
ISO 7045 is the cross-recessed pan head screw that dominates small assembly work: the surface-seated dome head of DIN 85, driven by a Phillips (Type H) or Pozidriv (Type Z) cross recess instead of a slot, from the smallest M1.6 up to M10. The collected table tabulates the pair of things an assembly line cannot improvise: the Socket No. — the cross-recess size number, 0 through 4, growing with the thread — and the recess geometry for each size in both series: the Ref. dimension and the Penetration depth max/min pair, printed once for Type H (Phillips) and once for Type Z (Pozidriv). Penetration depth is what decides whether the driver bottoms out or spins free, so it is the number to check when switching between H and Z drivers. Head diameter d k and height k carry their min/max limits, and the thread length b ladder runs 15 to 40 mm across the series. The slotted counterpart is DIN 85 on this site; the countersunk form is ISO 7046. Materials, property classes and finishes are not printed by the collected specification and follow the drawing callout.
| Standard | ISO 7045 — pan head screws with cross recess, H or Z type |
|---|---|
| Series | M1.6 – M10 (10 sizes tabulated) |
| Tabulated geometry | Per size: pitch P, runout a, head diameter d k, head height k, thread-end lash x, cross-recess Socket No. (0–4), recess M1 Type H Ref. + penetration depth max/min, recess M2 Type Z Ref. + penetration depth max/min, thread length b |
| Head / drive form | Pan head (surface-seated dome), cross recess — Phillips Type H or Pozidriv Type Z |
| Family note | Cross-recessed counterpart of slotted pan head DIN 85; countersunk form ISO 7046; raised countersunk ISO 7047 |
| Materials / strength | Not tabulated by the collected specification — per RFQ (property class and finish per drawing callout) |
| Nominal thread | P — Pitch | a — max | d k — max=nominal size | d k — min | k — max=nominal size | k — min | x — max | Socket No. | M1 — Type H — Ref. | Penetration depth — Type H — max | Penetration depth — Type H — min | M2 — Type Z — Ref. | Penetration depth — Type Z — max | Penetration depth — Type Z — min | Length of Thread b |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M1.6 | 0.35 | 0.7 | 3.2 | 2.9 | 1.3 | 1.16 | 0.9 | 0 | 1.7 | 0.95 | 0.7 | 1.6 | 0.9 | 0.65 | 15 |
| M2 | 0.4 | 0.8 | 4 | 3.7 | 1.6 | 1.46 | 1 | 0 | 1.9 | 1.2 | 0.9 | 2.1 | 1.42 | 1.17 | 16 |
| M2.5 | 0.45 | 0.9 | 5 | 4.7 | 2.1 | 1.96 | 1.1 | 1 | 2.7 | 1.55 | 1.15 | 2.6 | 1.5 | 1.25 | 18 |
| M3 | 0.5 | 1 | 5.6 | 5.3 | 2.4 | 2.26 | 1.25 | 1 | 3 | 1.8 | 1.4 | 2.8 | 1.75 | 1.5 | 19 |
| (M3.5) | 0.6 | 1.2 | 7 | 6.64 | 2.6 | 2.46 | 1.5 | 2 | 3.9 | 1.9 | 1.4 | 3.9 | 1.93 | 1.48 | 20 |
| M4 | 0.7 | 1.4 | 8 | 7.64 | 3.1 | 2.92 | 1.75 | 2 | 4.4 | 2.4 | 1.9 | 4.3 | 2.34 | 1.89 | 22 |
| M5 | 0.8 | 1.6 | 9.5 | 9.14 | 3.7 | 3.52 | 2 | 2 | 4.9 | 2.9 | 2.4 | 4.7 | 2.74 | 2.29 | 25 |
| M6 | 1 | 2 | 12 | 11.57 | 4.6 | 4.3 | 2.5 | 3 | 6.9 | 3.6 | 3.1 | 6.7 | 3.46 | 3.03 | 28 |
| M8 | 1.25 | 2.5 | 16 | 15.57 | 6 | 5.7 | 3.2 | 4 | 9 | 4.6 | 4 | 8.8 | 4.5 | 4.05 | 34 |
| M10 | 1.5 | 3 | 20 | 19.48 | 7.5 | 7.14 | 3.8 | 4 | 10.1 | 5.8 | 5.2 | 9.9 | 5.69 | 5.24 | 40 |
Materials
- Material, property class and finish specified per RFQ — the collected specification table covers geometry only
Ordering & documentation
Documents
Shipments of ISO 7045 Pan Head Screws with Cross Recess (H or Z) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 7045 Pan Head Screws with Cross Recess (H or Z) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ISO 7045 Pan Head Screws with Cross Recess (H or Z)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for iso 7045 pan head screws with cross recess (h or z) is 10,000 pieces (applies to the standard sizes and finishes for iso 7045 pan head screws with cross recess (h or z); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 7045 pan head screws with cross recess (h or z) run 3–7 days. Quantities or variants of iso 7045 pan head screws with cross recess (h or z) outside the standard range are confirmed at quotation.
Storage & shipping
ISO 7045 Pan Head Screws with Cross Recess (H or Z) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 7045 pan head screws with cross recess (h or z) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Type H or Type Z — and why does penetration depth matter?
H is the Phillips-style recess, Z the Pozidriv-style one; they look similar but their flanks and driver tips differ, and mixing them is the fastest way to burn a recess out. The table gives each size both series' geometry: the Ref. driving dimension and the max/min penetration depth — how deep the driver sits in the recess. Too shallow and the driver cam-outs under torque; too deep and the tip bottoms out before the head seats. When a drawing says "H or Z", match the driver to the tabulated penetration band for your size rather than assuming the recesses interchange.
What is the MOQ and lead time for these screws?
Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for ISO 7045 Pan Head Screws with Cross Recess (H or Z)?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for ISO 7045 Pan Head Screws with Cross Recess (H or Z) state?
State the full designation (ISO 7045), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ISO 7045 Pan Head Screws with Cross Recess (H or Z) inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your ISO 7045 Pan Head Screws with Cross Recess (H or Z)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support