Screw/Nut and Thrust-Collar Friction Coefficients

Friction coefficients f for screw/nut material pairs (steel, bronze, brass, cast iron; dry and machine-oil) and thrust-collar friction fc running/starting for steel-on-cast-iron and steel-on-bronze — power-screw friction reference tables.

Last updated: 2026-11

Request a Quote

Screw/Nut and Thrust-Collar Friction Coefficients in an industrial setting
Illustrative image redrawn from real Screw/Nut and Thrust-Collar Friction Coefficients product references — not a photograph of stocked items.

Specifications

Power screws — the threaded shafts that turn rotation into linear force in presses, jacks, valve stems and linear actuators — live or die by two friction numbers, and the collected tables carry both. Table 1 is the screw/nut pair friction f: steel-on-steel 0.15-0.25 dry (0.11-0.17 with machine oil), steel-on-bronze 0.15-0.23 dry (0.10-0.16 oiled), bronze-on-bronze 0.04-0.06 (the low point of the table — with a "-" where bronze-on-brass is not tabulated), steel-on-cast-iron 0.15-0.25. Table 2 is the thrust-collar friction fc where the rotating member bears its axial load: soft steel on cast iron 0.12 running/0.17 starting, hard steel on cast iron 0.09/0.15, soft steel on bronze 0.08/0.10, hard steel on bronze 0.06/0.08 — starting friction running 30-60% above running, the margin every drive sizing must carry. Sources are Shigley's Mechanical Engineering Design and the Mechanical Design and Systems Handbook, as the tables' own closing rows print.

Table 1 — screw/nut f Steel/steel 0.15-0.25 dry, 0.11-0.17 machine oil; steel/bronze 0.15-0.23 dry, 0.10-0.16 oiled; steel/brass 0.15-0.19 dry, 0.10-0.15 oiled; steel/cast iron 0.15-0.25 dry, 0.11-0.17 oiled; bronze/steel 0.08-0.12; bronze/bronze 0.04-0.06 (brass column "-"); bronze/cast iron 0.06-0.09
Table 2 — collar fc Soft steel/cast iron 0.12 running, 0.17 starting; hard steel/cast iron 0.09/0.15; soft steel/bronze 0.08/0.10; hard steel/bronze 0.06/0.08
Sources (as printed) Shigley's Mechanical Engineering Design and Mechanical Design and Systems Handbook — carried verbatim as the tables' closing rows
Not tabulated Thread-form efficiency (Acme/trapezoidal geometry factors), wear rates, PV limits for the nut material — per RFQ / design text
Friction coefficients f for screw/nut material pairs and thrust-collar friction fc (table 1 of 2)Table 1: screw-vs-nut material friction f (steel/bronze/brass/cast iron columns) for dry, machine-oil and bronze screw rows. Table 2: thrust-collar friction fc, running vs starting. Source notes (Shigley's Mechanical Engineering Design; Mechanical Design and Systems Handbook) carried verbatim as closing rows.
Friction Coefficient [f] for Screw and Nut
Screw MaterialNut Material
SteelBronzeBrassCast Iron
Steel, dry0.15-0.250.15-0.230.15-0.190.15-0.25
Steel, machine oil0.11-0.170.10-0.160.10-0.150.11-0.17
Bronze0.08-0.120.04-0.06-0.06-0.09
Source : From Shigley's Mechanical Engineering Design [Ref 1] and Mechanical Design and Systems Handbook [Ref 2]
  • The bronze-screw row's brass column prints '-' (combination not tabulated), carried verbatim.
Friction coefficients f for screw/nut material pairs and thrust-collar friction fc (table 2 of 2)Table 1: screw-vs-nut material friction f (steel/bronze/brass/cast iron columns) for dry, machine-oil and bronze screw rows. Table 2: thrust-collar friction fc, running vs starting. Source notes (Shigley's Mechanical Engineering Design; Mechanical Design and Systems Handbook) carried verbatim as closing rows.
Thrust-Collar Friction [fc] Coefficients
CombinationRunningStarting
Soft steel on cast iron0.120.17
Hard steel on cast iron0.090.15
Soft steel on bronze0.080.10
Hard steel on bronze0.060.08
Source : From Shigley's Mechanical Engineering Design [Ref 1] and Mechanical Design and Systems Handbook [Ref 2]
  • The bronze-screw row's brass column prints '-' (combination not tabulated), carried verbatim.

Materials

  • The bronze nut exists for a reason: bronze-on-steel halves friction, resists seizure against the steel screw and wears sacrificially — it is the default nut material for power screws above toy scale, with the collar numbers showing the same bronze advantage at the thrust face. Specify the pair, not just the screw: a steel nut substitution on a bronze-specified jack changes both the efficiency and the wear life. Lubrication state is the second axis — the dry-to-oiled spread in table 1 is a third of the friction, and power screws are usually the last place anyone remembers to oil

Ordering & documentation

Documents

Shipments of Screw/Nut and Thrust-Collar Friction Coefficients are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Screw/Nut and Thrust-Collar Friction Coefficients orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Screw/Nut and Thrust-Collar Friction Coefficients), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for screw/nut and thrust-collar friction coefficients is 10,000 pieces (applies to the standard sizes and finishes for screw/nut and thrust-collar friction coefficients; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for screw/nut and thrust-collar friction coefficients run 3–7 days. Quantities or variants of screw/nut and thrust-collar friction coefficients outside the standard range are confirmed at quotation.

Storage & shipping

Screw/Nut and Thrust-Collar Friction Coefficients are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store screw/nut and thrust-collar friction coefficients dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How do these two tables combine in a power-screw torque calculation?

The total torque to raise a load sums two terms: thread friction (from table 1's f, through the screw geometry) and collar friction (from table 2's fc, at the thrust face radius). Each carries its own coefficient, which is why the two tables are separate — a bronze nut on a steel screw with a hard-steel-on-bronze collar uses f ≈ 0.10-0.16 at the threads and fc ≈ 0.06-0.08 at the collar, and starting conditions use the higher fc column for the breakaway torque. Sizing a motor or hand-wheel off running friction alone is the classic under-specification: the starting column is 30-60% higher, and the drive must start.

Why is bronze-on-bronze marked "-" for the brass column, and what pair should I actually choose?

The "-" is the source's marker that the bronze-screw/brass-nut combination is not tabulated — combinations like that are rarely used and the handbooks leave them out rather than estimate. The practical selection ladder the tables do support: bronze nut against a steel screw for general power screws (moderate friction, seizure-resistant, wear taken by the replaceable nut); cast-iron nut where loads are light and cost rules; steel nuts only for light-duty positioning where friction and galling risk are acceptable. Whichever pair, quote both members on the RFQ — nut material is a designed choice, and the friction tables are its justification.

What is the MOQ and lead time for Screw/Nut and Thrust-Collar Friction Coefficients?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for Screw/Nut and Thrust-Collar Friction Coefficients state?

State the full designation (Screw/Nut and Thrust-Collar Friction Coefficients), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Screw/Nut and Thrust-Collar Friction Coefficients inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your Screw/Nut and Thrust-Collar Friction Coefficients
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.