ASME B18.6.3 UNC Cross Recessed Truss Head Machine Screws

Cross recessed (Phillips) truss head machine screws per ASME B18.6.3, UNC thread — #2 through 5/16 in basic diameter in steel or stainless steel. The wide, shallow domed head with an oversized bearing circle, driven by a Phillips driver.

Last updated: 2026-11

Request a Quote

ASME B18.6.3 UNC Cross Recessed Truss Head Machine Screws in an industrial setting
Illustrative image redrawn from real ASME B18.6.3 UNC Cross Recessed Truss Head Machine Screws product references — not a photograph of stocked items.

Specifications

The truss head is the widest domed head of the inch machine screw line: a low, broad dome that spreads clamp load over a bearing circle far larger than a pan head of the same gauge, which is why it is the callout for thin sheet, plastics and oversized or elongated fixing holes — anywhere a smaller head would pull through. The collected ASME B18.6.3 table runs from #2 (0.0860 in basic diameter) through 5/16 on UNC threads per inch — 40 TPI at #4, 24 at #10, 20 at 1/4, 18 at 5/16 — with head diameter and height per gauge: at #10 the head measures 0.448 in maximum diameter by 0.103 in maximum height, against the pan head at the same gauge at 0.373 in diameter; at 1/4 the truss reaches 0.573 in across. The drive is a Phillips cross recess, so the wide head keeps powered driving without the cam-out risk of driving a large flange with a blade. For the standard envelope, see the cross recessed pan head page; for a flush fit, the cross recessed flat countersunk page.

Standard ASME B18.6.3 — cross recessed truss head machine screws, UNC (unified coarse) thread
Size range #2 (0.0860 in) – 5/16 in (0.3125 in) basic diameter, UNC threads per inch
Dimensions at #2 (#2-56) dk (head diameter) max 0.194 in; k (head height) max 0.053 in
Dimensions at #10 (#10-24) dk max 0.448 in; k max 0.103 in
Dimensions at 1/4 (1/4-20) dk max 0.573 in; k max 0.133 in
Dimensions at 5/16 (5/16-18) dk max 0.698 in; k max 0.162 in
Materials Steel, stainless steel — grade and finish confirmed at quotation (tenant supply range)

Materials

  • Steel
  • Stainless steel

Ordering & documentation

Documents

Shipments of ASME B18.6.3 UNC Cross Recessed Truss Head Machine Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASME B18.6.3 UNC Cross Recessed Truss Head Machine Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASME B18.6.3 UNC Cross Recessed Truss Head Machine Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for asme b18.6.3 unc cross recessed truss head machine screws is 10,000 pieces (applies to the standard sizes and finishes for asme b18.6.3 unc cross recessed truss head machine screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for asme b18.6.3 unc cross recessed truss head machine screws run 3–7 days. Quantities or variants of asme b18.6.3 unc cross recessed truss head machine screws outside the standard range are confirmed at quotation.

Storage & shipping

ASME B18.6.3 UNC Cross Recessed Truss Head Machine Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store asme b18.6.3 unc cross recessed truss head machine screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When is the truss head worth the extra diameter?

When the joint material is the weak side of the pair. Comparing the collected ASME B18.6.3 tables at #10, the truss head spans 0.448 in maximum diameter against the pan head at 0.373 in — about twenty percent more bearing circle at a lower profile, 0.103 in maximum height. Over thin sheet, brittle plastics or elongated fixing holes, that extra bearing area is what stops pull-through; in machined bosses and thick fixtures it only adds a larger boss footprint. Match the truss head to the joints where the surface, not the screw, limits the clamp.

Truss head or washered pan head — how do they compare as bearing solutions?

Both spread load, but differently: a pan head plus a separate flat washer lets you size the bearing circle independently and add a hardened face, while the truss head builds the bearing into the part — no washer to stock, but the bearing diameter is fixed by the ASME B18.6.3 table (0.448 in maximum at #10, 0.573 in at 1/4). The truss form is the common answer in high-volume sheet assembly where a washer is one more feeding operation; the washered pan head is the answer where the bearing surface must be hardened or oversized beyond the standard truss envelope.

What is the MOQ and lead time for these cross recessed inch machine screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3-7 days; non-stock gauge sizes, lengths or finishes are quoted with a confirmed schedule. Confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these cross recessed machine screws state?

State the standard designation (ASME B18.6.3), gauge size and threads per inch (for example #6-32, #10-24, 1/4-20 UNC), length, head style, drive (cross recessed / Phillips), material and grade (steel or stainless; state the stainless grade such as 18-8/A2 or 316/A4 if specified), finish, required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASME B18.6.3 UNC Cross Recessed Truss Head Machine Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ASME B18.6.3 UNC Cross Recessed Truss Head Machine Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.