2H05 Two Hole Countersunk Self Tapping Security Screws

Countersunk head two-hole self-tapping security screws, No.4–No.14 as tabulated (2.9–6.3 mm nominal): head diameters 5.5–12.3 mm, head heights 1.7–3.9 mm. Stainless steel standard; marked lengths run from 1/4″ to 2 1/2″ per the collected matrix, cell by cell with gaps.

Last updated: 2026-11

Request a Quote

2H05 Two Hole Countersunk Self Tapping Security Screws in an industrial setting
Illustrative image redrawn from real 2H05 Two Hole Countersunk Self Tapping Security Screws product references — not a photograph of stocked items.

Specifications

The countersunk self-tapping member of the two-hole line combines the flush seat with the thread-cutting point: the conical head disappears into a prepared countersink, the thread forms as it drives, and the twin-hole drive leaves nothing but two discreet holes on the finished surface. The collected tabulation runs gauges No.4 to No.14 (nominal 2.9 to 6.3 mm) with head diameters 5.5–12.3 mm and head heights 1.7–3.9 mm, states supply as standard in stainless steel in lengths from 1/4″ to 2 1/2″, and records the snake-eye/pig-nose alias family in full. The application framing the collected page gives is the telling one: areas where the aesthetic appearance matters more than the security level — trains, public lifts — because a flush security fixing reads as ordinary hardware to the eye while still requiring the special insert bit. The length matrix marks cells individually; the No.4 gauge is marked from 1/4″ to 1 1/2″, No.6 from 3/8″ to 2″, No.8 from 3/8″ to 2 1/2″, No.10 from 1/2″ to 2 1/2″, No.12 and No.14 from 1/2″ to 2″, and any pair outside those marked runs is a quotation line. Drive behaviour is family-standard: reusable two-way, low to medium torque, cam-out earlier than a pin-hex, bits wearing with use.

Designation 2H05 — countersunk head self-tapping security screw, two-hole drive; seats flush in a prepared countersink, thread-cutting point, two-pin insert bit
Gauge range (tabulated) No.4, No.6, No.8, No.10, No.12, No.14 (nominal 2.9–6.3 mm)
Head diameter dk per gauge (mm) No.4 5.5 · No.6 6.6 · No.8 7.8 · No.10 8.9 · No.12 10.1 · No.14 12.3
Head height k per gauge (mm) No.4 1.7 · No.6 2.1 · No.8 2.5 · No.10 3.0 · No.12 3.4 · No.14 3.9
Tool size (collected) No.4 · No.6 · No.8 · No.10 · No.12 · No.14 two-pin insert bits by gauge
Length availability (as marked) No.4 1/4″–1 1/2″ · No.6 3/8″–2″ · No.8 3/8″–2 1/2″ · No.10 1/2″–2 1/2″ · No.12 1/2″–2″ · No.14 1/2″–2″ (as marked in the collected matrix; pairs outside confirmed at quotation)
Security principle Reusable two-way fixing, low/medium security resistance with an aesthetics-first finish; low to medium torque
Materials (collected) Stainless steel as standard; non-standard sizes and materials to order

Materials

  • Stainless steel

Ordering & documentation

Documents

Shipments of 2H05 Two Hole Countersunk Self Tapping Security Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for 2H05 Two Hole Countersunk Self Tapping Security Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (2H05 Two Hole Countersunk Self Tapping Security Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for 2h05 two hole countersunk self tapping security screws is 10,000 pieces (applies to the standard sizes and finishes for 2h05 two hole countersunk self tapping security screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for 2h05 two hole countersunk self tapping security screws run 3–7 days. Quantities or variants of 2h05 two hole countersunk self tapping security screws outside the standard range are confirmed at quotation.

Storage & shipping

2H05 Two Hole Countersunk Self Tapping Security Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store 2h05 two hole countersunk self tapping security screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Countersunk or pan head on a self-tapping snake-eye screw?

Decide by the surface. The countersunk 2H05 seats flush — the choice on train interiors, lift cars and any public face where a proud head snags clothing or looks like hardware. The pan head 2H04 carries more bearing on thin sheet that cannot take a countersink. Both share the same gauge span, the same twin-hole drive and the same reusable two-way behaviour, so the head and the substrate finish make the decision, not the security level.

Does the countersink have to be prepared before fitting?

For the flush finish this screw is chosen for, yes: the 90° conical head needs a mating seat, and without one it sits proud or digs unevenly into thin sheet. The collected matrix marks its length cells by gauge — respect those marked pairs when planning the run, and quote the exact gauge/length combination on the RFQ so the supply matches the seats you have cut.

What is the MOQ and lead time for these security screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; sizes quoted as available to order, and non-standard sizes or materials, are quoted with a confirmed schedule. Confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these security screws state?

State the designation code (2H01 through 2H14) and head style, the drive (two-hole pig nose / snake eye — fitted with a matching two-pin insert bit), thread or tapping size and length, the hole centre distance your existing bits expect (the source notes it varies between makers), material and finish, the substrate or mating part, required certificates, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your 2H05 Two Hole Countersunk Self Tapping Security Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your 2H05 Two Hole Countersunk Self Tapping Security Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.