IS 1364 Part 2 Hexagon Head Screws (M1.6-M64)

IS 1364-2002 part 2 hexagon head screws, M1.6 to M64: pitch, runout, head shear, bearing face, across flats and corners, head height and fillet ladders — the Indian standard metric hex screw identity.

Last updated: 2026-11

Request a Quote

IS 1364 Part 2 Hexagon Head Screws (M1.6-M64) in an industrial setting
Illustrative image redrawn from real IS 1364 Part 2 Hexagon Head Screws (M1.6-M64) product references — not a photograph of stocked items.

Specifications

IS 1364 is the Indian standard for hexagon head screws and bolts, technically aligned with the ISO 4014-family, and the collected part 2 table runs the wide range M1.6 to M64 across two size segments (M1.6-M20 and M22-M64, non-preferred sizes parenthesized). The attribute rows follow the ISO pattern: pitch P (0.35 at M1.6 to 6 at M64), thread runout a, head shear c, bearing da/dw with grade-split rows, across-corners e max/min grade-split (3.41/3.28 at M1.6 up the ladder to the large sizes), head height k max/min, and across flats s with its tolerance ladder. Where procurement specifies Indian-standard documentation — or a Bill of Materials cites IS 1364 part 2 — this is the designation identity behind the familiar ISO-shaped part.

Standard / scope IS 1364-2002 part 2 hexagon head screws (size range M1.6-M64) — two size segments, non-preferred sizes parenthesized as printed
Pitch P 0.35 (M1.6), 0.4, 0.45, 0.5, 0.6, 0.7, 0.8, 1.0, 1.25, 1.5, 1.75, 2.0, 2.0, 2.5, 2.5 across the first segment; coarser to 6 at M64
Width across corners e Grade A max 3.41 (M1.6), grade-B rows behind (3.28...) — max/min grade-split ladders as printed
Head height k 1.1 (M1.6) max to 12.5-class at M20 first segment, continuing to the large sizes; min rows behind
Width across flats s Nominal ladder from the M1.6 size upward with max/min tolerance rows as printed
Not tabulated Property classes (IS 1364 part 3 territory), lengths, finishes — per RFQ
IS 1364-2002 part 2 hexagon head screws, M1.6-M64 — by size (table 1 of 1)mm. Salvaged size-designation header rows (two segments, 15 + 14 columns) used as size column headers. Attribute-label table positionally paired with two numeric grids; values untouched.
AttributeSub-labelNoteM1.6M2M2.5M3(M3.5)M4M5M6M8M10M12(M14)M16(M18)M20(M22)M24(M27)M30(M33)M36(M39)M42(M45)M48(M52)M56(M60)M64
PP0.350.40.450.50.60.70.811.251.51.75222.52.52.5333.53.5444.54.5555.55.56
aa1.051.21.351.51.82.12.4344.55.3667.57.57.59910.510.5121213.513.5151516.516.518
aa0.350.40.450.50.60.70.811.251.51.75222.52.52.5333.53.5444.54.5555.55.56
cc0.250.250.250.40.400.400.50.500.600.600.600.60.80.80.80.80.80.80.80.80.81.01.01.01.01.01.011.0
cc0.100.100.100.150.150.150.150.150.150.150.150.150.20.20.20.20.20.20.20.20.20.30.30 .30.30.30.30.30.3
d ad a22.63.13.64.14.75.76.89.211.213.715.717.720.222.424.426.430.433.436.439.442.445.648.652.656.6636771
d wd wGrade A2.273.074.074.575.075.886.888.8811.6314.6316.6319.6422.4925.3428.1931.7133.61------------
d wd w2.32.953.954.454.955.746.748.7411.4714.4716.4719.152224.8527.731.3533.253842.7546.5551.1155.8659.9564.769.4574.278.6683.4188.16
eeGrade A3.414.325.456.016.587.668.7911.0514.3817.7720.0323.3626.7530.1433.5337.7239.98------------
ee3.284.185.315.886.447.508.6310.8914.2017.5919.8522.7826.1729.5632.9537.2939.5545.250.8555.3760.7966.4471.376.9582.688.2593.5699.21104.86
kk1.11.41.722.42.83.545.36.47.58.81011.512.514151718.72122.52526283033353840
kk1.2251.5251.8252.1252.5252.9253.654.155.456.587.688.9810.1811.71512.71514.21515.215------------
kk0.9751.2751.5751.8752.2752.6753.353.855.156.227.328.629.8211.28512.28513.78514.785------------
kk1.31.61.92.22.63.03.744.245.546.697.799.0910.2911.8512.8514.3515.3517.3519.1221.4222.9225.4226.4228.4230.4233.535.538.540.5
kk0.91.21.51.82.22.63.263.765.066.117.218.519.7111.1512.1513.6514.6516.6518.2820.5822.0824.5825.5827.5829.5832.534.537.539.5
k 1k 1Grade A0.680.891.101.311.591.872.352.703.614.355.126.036.877.98.69.6510.35------------
k 1k 10.630.841.051.261.541.822.282.633.544.285.055.966.87.818.519.5610.2611.6612.814.4115.4617.2117.9119.3120.7122.7524.1526.2527.65
rr0.10.10.10.10.10.20.20.250.40.40.60.60.60.60.80.80.8111111.21.21.61.6222
ss3.204.005.005.506.007.008.0010.0013.0016.0018.0021.0024.002730.0034.0036.004146505560.065.070.075.080.085.090.095
ss3.023.824.825.325.826.787.789.7812.7315.7317.7320.6723.6726.6729.6733.3835.38------------
ss2.93.74.75.25.706.647.649.6412.5715.5717.5720.1623.1626.1629.1633.0035.0040454953.858.863.168.173.178.182.887.892.8

Materials

  • IS-standard hardware is the domestic default across Indian industry and interchangeable with ISO 4014-family parts at the common sizes — but certificates differ: an order citing IS 1364 gets Indian-standard test paperwork, and contracts sometimes require exactly that. Supply is 4.6-10.9 property classes, zinc/black/hot-dip finishes. Where drawings are ISO but supply is Indian, name both ("ISO 4017 equivalent, IS 1364-2 cited") on the RFQ so the certificate matches the acceptance basis

Ordering & documentation

Documents

Shipments of IS 1364 Part 2 Hexagon Head Screws (M1.6-M64) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for IS 1364 Part 2 Hexagon Head Screws (M1.6-M64) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (IS 1364 Part 2 Hexagon Head Screws (M1.6-M64)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for is 1364 part 2 hexagon head screws (m1.6-m64) is 10,000 pieces (applies to the standard sizes and finishes for is 1364 part 2 hexagon head screws (m1.6-m64); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for is 1364 part 2 hexagon head screws (m1.6-m64) run 3–7 days. Quantities or variants of is 1364 part 2 hexagon head screws (m1.6-m64) outside the standard range are confirmed at quotation.

Storage & shipping

IS 1364 Part 2 Hexagon Head Screws (M1.6-M64) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store is 1364 part 2 hexagon head screws (m1.6-m64) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Is an IS 1364 part 2 screw interchangeable with ISO 4014-family hardware?

At the common sizes, geometrically yes — the standard is ISO-aligned and the tables here read like the ISO ladders (the same pitch per diameter, the same across-flats architecture). The differences that matter commercially are documentation and edition detail: IS 1364 carries its own part structure (part 2 being screws), its own tolerance editions and its own certificate chain. So the parts interchange on the bench, but an order that must satisfy an IS-cited contract should ship against IS paperwork, and vice versa — name the standard you are buying to and let the RFQ carry it.

What do the grade-split rows on e and dw mean here?

As in the ISO family, product grade A (tight, for headed-with-turning or ground supply) and grade B (general, for cold-formed heads) carry separate min/max bands on the across-corners and bearing-face rows — the table prints them as stacked grade-labelled rows. Grade A matters where the wrench fit must be exact (jigged assembly, torque-critical tooling); grade B is the volume supply. The property class stamped on the head is a separate axis entirely — quote product grade, property class and standard together when tolerance matters.

What is the MOQ and lead time for IS 1364 Part 2 Hexagon Head Screws (M1.6-M64)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for IS 1364 Part 2 Hexagon Head Screws (M1.6-M64) state?

State the full designation (IS 1364 Part 2 Hexagon Head Screws (M1.6-M64)), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your IS 1364 Part 2 Hexagon Head Screws (M1.6-M64) inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your IS 1364 Part 2 Hexagon Head Screws (M1.6-M64)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.