ISO 4766 Slotted Set Screws, Flat Point
ISO 4766 slotted set screws with flat point M1 to M12 — the smallest slotted grub-screw line, with the collected dp/n/t point-and-slot rows and the full length ladder with per-thread mass.
Last updated: 2026-11
Specifications
The flat-point slotted set screw is the lightest-duty member of the set-screw family this catalog carries in hex-socket form (ISO 4026/4027/4028/4029): a slot instead of a socket means a plain screwdriver drives it, and the flat point bears on the mating part without digging — indexing small pulleys, collars and knobs where the clamp is more position than torque. The collected page is the widest size ladder in this batch: M1 to M12 with pitch P, point diameter dp (0,5 → 8,5 nominal max.), slot width n in nominal/max./min. and slot depth t. The length ladder runs l 2 to 60 with per-thread mass in kg/1000 pcs and "+" trade-size marks where the source offers a length without tabulated weight; the (14) length is the source's own non-preferred marking. One verbatim quirk is flagged: the l 16 row prints an M8 mass of 2,1 that steps the wrong way between its neighbours — carried, not corrected. Property class and finish are not tabulated — per RFQ.
| Standard | ISO 4766 — slotted set screws with flat point (slotted grub screws) |
|---|---|
| Size range | M1 – M12 with (M3,5) as the source's non-preferred marking; length ladder l 2 – 60 |
| Point geometry | Flat point, dp nominal max. 0,5 → 8,5 mm across the ladder |
| Slot | n nominal 0,2 → 2; t (nominal min.) 0,4 → 2,8 |
| Mass | kg/1000 pcs per thread from the length ladder; "+" = trade size per the source's own marker |
| Material / class / finish | Not tabulated by the collected specification — per RFQ |
| Thread size d | M1 | M1,2 | M1,4 | M1,6 | M2 | M2,5 | M3 | (M3,5) | M4 | M5 | M6 | M8 | M10 | M12 | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P | 0,25 | 0,25 | 0,3 | 0,35 | 0,4 | 0,45 | 0,5 | 0,6 | 0,7 | 0,8 | 1 | 1,25 | 1,5 | 1,75 | ||
| df | Minor thread diameter | |||||||||||||||
| dp | Nominal max. | 0,5 | 0,6 | 0,7 | 0,8 | 1 | 1,5 | 2 | 2,2 | 2,5 | 3,5 | 4 | 5,5 | 7 | 8,5 | |
| min. | 0,25 | 0,35 | 0,45 | 0,55 | 0,75 | 1,25 | 1,75 | 1,95 | 2,25 | 3,2 | 3,7 | 5,2 | 6,67 | 8,14 | ||
| n | Nominal | 0,2 | 0,2 | 0,2 | 0,25 | 0,25 | 0,4 | 0,4 | 0,5 | 0,6 | 0,8 | 1 | 1,2 | 1,6 | 2 | |
| max. | 0,26 | 0,26 | 0,26 | 0,31 | 0,31 | 0,46 | 0,46 | 0,56 | 0,66 | 0,86 | 1,06 | 1,26 | 1,66 | 2,06 | ||
| min. | 0,4 | 0,4 | 0,4 | 0,45 | 0,45 | 0,6 | 0,6 | 0,7 | 0,8 | 1 | 1,2 | 1,51 | 1,91 | 2,31 | ||
| t | nominal min. | 0,4 | 0,4 | 0,48 | 0,56 | 0,64 | 0,72 | 0,8 | 0,96 | 1,12 | 1,28 | 1,6 | 2 | 2,4 | 2,8 | |
| max. | 0,52 | 0,52 | 0,63 | 0,74 | 0,84 | 0,95 | 1,05 | 1,21 | 1,45 | 1,63 | 2 | 2,5 | 3 | 3,6 | ||
| l | Weight kg/1000pcs |
- Row 2 (df): 'Minor thread diameter' is a spanning header band; the row carries no per-size values and is reproduced verbatim
| l nominal | min. | max. | M1 | M1,2 | M1,4 | M1,6 | M2 | M2,5 | M3 | (M3,5) | M4 | M5 | M6 | M8 | M10 | M12 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 1,8 | 2,2 | 0,007 | 0,011 | 0,015 | 0,021 | + | |||||||||
| 2,5 | 2,3 | 2,7 | 0,009 | 0,014 | 0,019 | 0,027 | + | + | ||||||||
| 3 | 2,8 | 3,2 | 0,011 | 0,017 | 0,023 | 0,033 | 0,048 | 0,075 | 0,11 | 0,15 | ||||||
| 4 | 3,75 | 4,25 | 0,015 | 0,024 | 0,031 | 0,047 | 0,067 | 0,11 | 0,15 | 0,21 | 0,26 | 0,4 | ||||
| 5 | 4,75 | 5,25 | + | + | 0,04 | 0,061 | 0,068 | 0,14 | 0,2 | 0,27 | 0,34 | 0,52 | 0,72 | |||
| 6 | 5,7 | 6,3 | + | + | 0,075 | 0,1 | 0,17 | 0,24 | 0,33 | 0,41 | 0,65 | 0,9 | 1,6 | |||
| 8 | 7,7 | 8,3 | + | + | 0,14 | 0,23 | 0,33 | 0,45 | 0,57 | 0,9 | 1,25 | 2,3 | ||||
| 10 | 9,7 | 10,3 | + | + | 0,42 | 0,56 | 0,72 | 1,15 | 1,6 | 3 | 4,2 | |||||
| 12 | 11,6 | 12,4 | + | + | 0,68 | 0,87 | 1,4 | 1,95 | 3,7 | 5,2 | + | |||||
| (14) | 13,6 | 14,4 | + | + | + | 1,65 | 2,3 | 4,4 | 6,2 | + | ||||||
| 16 | 15,6 | 16,4 | + | + | + | 1,9 | 2,65 | 2,1 | 7,2 | + | ||||||
| 20 | 19,6 | 20,4 | + | + | + | 3,35 | 6,5 | 9,2 | + | |||||||
| 25 | 24,6 | 25,4 | + | + | + | 8,3 | 11,7 | + | ||||||||
| 30 | 29,6 | 30,4 | + | + | + | 14,2 | + | |||||||||
| 35 | 34,5 | 35,5 | + | + | + | |||||||||||
| 40 | 39,5 | 40,5 | + | + | ||||||||||||
| 45 | 44,5 | 45,5 | + | + | ||||||||||||
| 50 | 49,5 | 50,5 | + | + | ||||||||||||
| 55 | 54,4 | 55,6 | + | |||||||||||||
| 60 | 59,4 | 60,6 | + |
- Row 11 (16): l 16 row: M8 mass prints 2,1 between M5's 1,9 and M6's 2,65 - a non-monotone step against the ladder's neighbours; carried verbatim, not normalized
- Row 10 ((14)): the length run (14) is parenthesised in the source (non-preferred length) - carried verbatim
Materials
- Property class and finish specified per RFQ — small set screws commonly run 14H/22H case-hardened steel with black or zinc finish; state the mating material (the flat point marks softer shafts less) and any stainless need at quotation
Ordering & documentation
Documents
Shipments of ISO 4766 Slotted Set Screws, Flat Point are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 4766 Slotted Set Screws, Flat Point orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ISO 4766 Slotted Set Screws, Flat Point), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for iso 4766 slotted set screws, flat point is 10,000 pieces (applies to the standard sizes and finishes for iso 4766 slotted set screws, flat point; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 4766 slotted set screws, flat point run 3–7 days. Quantities or variants of iso 4766 slotted set screws, flat point outside the standard range are confirmed at quotation.
Storage & shipping
ISO 4766 Slotted Set Screws, Flat Point are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 4766 slotted set screws, flat point dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Flat point (ISO 4766) or cup point — which slotted set screw for a small shaft collar?
Bearing surface versus bite. The flat point spreads its clamp over a small annulus, so it positions without marring — right for knobs, index pointers and any part you will reposition; but on a smooth shaft under torque it holds less than a point that digs. The cup point (this catalog carries it as ISO 7436 in slotted form) bites a shallow ring into the shaft and resists rotation far better — the standard choice where the set screw is the only anti-slip element. Both lines here are slotted, i.e. screwdriver-driven: the collected ISO 4766 ladder runs M1 to M12 with the full mass table, ISO 7436 covers the d 1,4 – 6 cup-point range. If the joint sees real torque, step up to the hex-socket set screws (ISO 4026 flat / 4029 cup) — the socket takes installation torque a slot cannot. Class and finish per RFQ on all of them; watch the flagged l 16 mass cell on this page if you compute shipping weights.
What is the MOQ and lead time for ISO 4766 Slotted Set Screws, Flat Point?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for ISO 4766 Slotted Set Screws, Flat Point state?
State the full designation (ISO 4766), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ISO 4766 Slotted Set Screws, Flat Point inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your ISO 4766 Slotted Set Screws, Flat Point
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support