DIN 34805 Hexalobular Socket Button Head Screws

DIN 34805 hexalobular socket button head screws in M3 to M12 — the Torx-drive low-domed head screw, part 1 plain and part 2 with a collar — with the full collected per-size tables: head and shank tolerances, bearing radii, socket number and depth for both parts, and the collar diameter dc that distinguishes the -2 part.

Last updated: 2026-11

Request a Quote

DIN 34805 Hexalobular Socket Button Head Screws in an industrial setting
Illustrative image redrawn from real DIN 34805 Hexalobular Socket Button Head Screws product references — not a photograph of stocked items.

Specifications

DIN 34805 is the button head screw driven by a hexalobular socket — the six-lobed star recess rather than the hex socket of the ISO 7380 line — and it comes in two parts: -1 plain, and -2 with an integral collar under the head. The lobular drive is the reason to specify it: torque is spread over six contact faces instead of two, so cam-out and recess wear both drop on powered assembly lines, which is where this head earns its place over a hex socket button screw of the same dome profile. The collar on the -2 part plays the flange role — a wider bearing circle that spreads the clamp load on softer mating material without a separate washer, and the collected table prices that in through the dc row, 6.9 mm at M3 rising to 26 mm at M12. The tables on this page run the full M3 to M12 series with the geometry both the buyer and the die shop need: head diameter dk with its max/min band, shank diameter ds tolerances, the head fillet radii R and the under-head radii r1/r2 that the source footnotes to the thread-free and thread-to-head variants, the bearing-circle diameter dw, and the drive itself — socket number 10 through 55 with the reference socket dimension A and the socket depth t in max/min. Two selection notes: the head height k on DIN 34805 runs slightly taller than the ISO 7380-1 counterpart at the small sizes (1.8 mm at M3 against 1.65), so a head-height-critical pocket should be checked against the table before swapping between the two designations; and the source tabulates no property class or tensile loads for this series, so strength and material are confirmed per RFQ rather than read off the page. For the hex-socket button head counterpart, see the ISO 7380-1 and ISO 7380-2 pages on this site.

Standard DIN 34805 (2018) — button head screws with hexalobular socket; part 1 plain, part 2 with collar
Series M3, M4, M5, M6, M8, M10, M12 — seven sizes as tabulated by the collected source
Drive Hexalobular socket, No. 10 to No. 55 across the series; socket reference dimension A 2.8–11.35 mm and depth t tabulated per size
Tabulated geometry (part -1) Per size: pitch P, thread length b (ref), da, head dia dk max/min, d1, shank ds max/min, bearing dia dw min, head height k max/min, head radius R max/min, radii r1/r2 min, socket No., A ref, socket depth t max/min
Tabulated geometry (part -2) Collar diameter dc max/min (6.9–26 mm) added to the shared P/ds/k/socket/t rows
Materials / strength / finish Not tabulated by the collected specification — per RFQ
DIN 34805-1 (2018) button head screws with hexalobular socket — full collected geometry (M3 to M12)All dimensions in millimetres, as printed by the collected source. dk = head diameter; ds = shank diameter; dw = bearing-circle diameter (min); R = head radius; r1/r2 = under-head radii (the source footnotes r1 to the thread-free variant and r2 to the thread-to-head variant); A = socket reference dimension; t = socket depth. Thread length b is printed as a reference value only.
ThreadP (mm)b ref (mm)da max (mm)dk max (mm)dk min (mm)d1 ref (mm)ds max (mm)ds min (mm)dw min (mm)k max (mm)k min (mm)R max (mm)R min (mm)r1 min (mm)r2 min (mm)Socket No.A ref (mm)t max (mm)t min (mm)
M30.5183.65.75.43.532.864.971.81.63.52.50.10.3102.80.930.8
M40.7204.77.67.244.943.826.662.452.254.63.40.20.4203.951.531.24
M50.8225.79.59.145.654.828.4132.75.64.40.20.45254.51.611.32
M61246.810.510.07765.829.263.336.250.250.5305.61.781.48
M81.25289.21413.579.987.7812.484.54.27.66.20.40.7457.932.542.15
M101.53211.217.517.0711.2109.7815.75.55.210.18.50.40.7508.953.052.65
M121.753613.72120.4814.21211.7318.856.66.2411.8100.61.15511.353.83.35
  • Source series is M3-M12 (7 sizes) as printed — the source tabulates no M14/M16 for DIN 34805; larger sizes are per RFQ.
  • Thread length b is printed as a reference (Ref.) row, 18-36 mm across the series; the source also prints a trailing "Length of Thread b" row of dashes, which is not a data row and is not transcribed.
  • Corroboration: the dk max row matches the independently collected ISO 7380-1 head-diameter ladder (registered x43 primary table, corroborated by the x211 Reyher table) 7/7 across M3-M12 — consistent head tooling across the two button-head designations.
  • Head height k on this series (max 1.8 mm at M3) is taller than the ISO 7380-1 counterpart (1.65 mm at M3) per the collected sources — both ladders kept verbatim, not harmonized; check head height before interchanging the designations.
  • No property class, tensile loads or finishes are tabulated for DIN 34805 on the collected source — strength and material stay per RFQ.
DIN 34805-2 (2018) button head screws with collar and hexalobular socket — collar diameter dc and shared rows (M3 to M12)All dimensions in millimetres, as printed by the collected source. dc = collar (bearing) diameter — the dimension that distinguishes the -2 part from plain -1. The source repeats the P, ds, k, socket No., A and t rows identically for -1 and -2; see the shared-rows flag.
ThreadP (mm)dc max (mm)dc min (mm)ds max (mm)ds min (mm)k max (mm)k min (mm)Socket No.A ref (mm)t max (mm)t min (mm)
M30.56.96.3232.861.81.6102.80.930.8
M40.79.48.8243.822.452.25203.951.531.24
M50.811.811.154.8232.7254.51.611.32
M6113.612.965.823.33305.61.781.48
M81.2517.817.187.784.54.2457.932.542.15
M101.521.921.06109.785.55.2508.953.052.65
M121.752625.161211.736.66.245511.353.83.35
  • Corroboration: the dc max row (6.9/9.4/11.8/13.6/17.8/21.9/26) matches the independently collected Reyher ISO 7380-1/-2 dc row for M3-M12 exactly (registered batch x211 table, decimal commas there) — two independent sources agree on the flange/bearing-circle ladder.
  • The collected source prints the P, ds, k, socket No., A and t rows with identical values for -1 and -2 rather than as independently measured -2 rows; they are reproduced as printed, and only the dc row is genuinely -2-specific on this source.
  • As with part -1, no property class, tensile loads or finishes are tabulated — strength and material stay per RFQ.

Materials

  • Material, strength class and finish specified per RFQ — the collected specification tables cover geometry only

Ordering & documentation

Documents

Shipments of DIN 34805 Hexalobular Socket Button Head Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 34805 Hexalobular Socket Button Head Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 34805 Hexalobular Socket Button Head Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for din 34805 hexalobular socket button head screws is 10,000 pieces (applies to the standard sizes and finishes for din 34805 hexalobular socket button head screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 34805 hexalobular socket button head screws run 3–7 days. Quantities or variants of din 34805 hexalobular socket button head screws outside the standard range are confirmed at quotation.

Storage & shipping

DIN 34805 Hexalobular Socket Button Head Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 34805 hexalobular socket button head screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

DIN 34805 or ISO 7380-1 — when does the hexalobular drive decide it?

On powered assembly, the six-lobed recess takes installation torque with less cam-out and less recess wear than a hex socket of the same head, which is why production lines specify DIN 34805 for high-volume button-head joints. The head profiles are near-twins — domed, bearing directly on the surface — but the DIN 34805 head runs slightly taller at the small sizes (k max 1.8 mm at M3 versus 1.65 for ISO 7380-1), so check the head-height rows in the two tables before interchanging in a depth-critical pocket. The -2 collar part further differs from flangeless ISO 7380-1 by carrying its own bearing circle, dc 6.9–26 mm across the series.

What is the difference between DIN 34805 part -1 and part -2?

The collar. Part -1 is the plain button head; part -2 adds an integral collar under the head whose diameter dc — 6.9 mm at M3 to 26 mm at M12 in the collected table — widens the bearing surface and spreads the clamp load, doing the job of a separate washer on softer mating material. The thread, shank, head height and drive geometry are the same dimensions in the collected tables, so the choice is bearing surface, not fit.

What should an RFQ for DIN 34805 screws state?

The designation and part (-1 plain or -2 with collar), thread size M3–M12, length under the head, material and strength class, finish, any certificate requirement, and quantity per size. The socket number and depth, head and shank tolerances and collar diameter are in the tables on this page; commercial terms follow the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 34805 Hexalobular Socket Button Head Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your DIN 34805 Hexalobular Socket Button Head Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.