Legacy BS 3692 / BS 4320 Hexagon Bolts, Nuts and Washers
Legacy BS 3692 hexagon bolt and nut limits of size (coarse and fine threads, M3 - M36, decimal-comma notation as printed) with BS 4320 normal and large plain-washer series — the pre-ISO British tabulation still referenced on legacy drawings, carried verbatim with its max-min limit pairs.
Last updated: 2026-11
Specifications
Legacy British drawings still call out BS 3692 hexagon bolts and BS 4320 washers, and their limits differ in the details from the current ISO hexagon line — enough to matter when a legacy fastener must mate with modern tooling. The collected page tabulates, in its own decimal-comma notation: the bolt coarse limits (major d max-min as one cell, e.g. M12 "11,966 - 11,701"; minor d3; pitch diameter d2; head thickness Zb; A/F max-min; A/C across corners), the same ladder for fine threads (M6x0,75 through M36x3,00), the nut tables (major D nominal, minor D1 max-min, nut thickness Zn), and the two BS 4320 washer series (normal M3 - M36 and large M5 - M48, internal/external diameter and thickness max-min pairs, with a Thin column on the normal series). Two carried-verbatim quirks to note when reading: the M36 rows print "36,00" (two decimals against the three-decimal column pattern) and the A/C column drops to one decimal at M30/M36 ("53,1", "63,5") — all flagged under the tables, not normalized. Compare against the current ISO hexagon reference in the bolts family when a drawing permits either standard; where they diverge (the BS washer OD ladder runs slightly larger than ISO at some sizes), the drawing's callout governs. Strength grades and finish are not tabulated — per RFQ.
| Bolt coarse limits | M3 - M36: major d, minor d3, pitch dia d2 max-min pairs, Zb head thickness, A/F max-min, A/C across corners |
|---|---|
| Bolt fine limits | M6x0,75 - M36x3,00: same column set, per the fine ladder |
| Nut tables | Coarse M3 - M36 and fine M6 - M36: major D nominal, minor D1 max-min, thickness Zn |
| Washers BS 4320 | Normal series M3 - M36 (plus Thin column M6 up), large series M5 - M48; internal/external dia and thickness max-min pairs |
| Notation | Decimal commas throughout, max-min pairs in single cells with an en dash — carried verbatim |
| Not tabulated | Strength grades, proof loads, finish, thread tolerance classes — per RFQ |
| Nominal size | Pitch | Major d max–min | Minor d3 max–min | Pitch diameter d2 max–min | Bolt head thickness Zb | A/F max–min | A/C |
|---|---|---|---|---|---|---|---|
| M3 | 0,5 | 2,980 - 2,874 | 2,439 -2,272 | 2,655 - 2,580 | 2,125 | 5,50 - 5,38 | 6,40 |
| M4 | 0,7 | 3,978 - 3,838 | 3,220 - 3,002 | 3,523 - 3,433 | 2,925 | 7,00 - 6,85 | 8,10 |
| M5 | 0,8 | 4,976 - 4,826 | 4,110 - 3,869 | 4,456 - 4,361 | 3,650 | 8,00 - 7,85 | 9,20 |
| M6 | 1,0 | 5,974 - 5,794 | 4,891 - 4,596 | 5,324 - 5,212 | 4,150 | 10,00 - 9,78 | 11,50 |
| M8 | 1,25 | 7,972 - 7,760 | 6,619 - 6,272 | 7,160 - 7,042 | 5,650 | 13,00 - 12,73 | 15,00 |
| M10 | 1,5 | 9,968 - 9,732 | 8,344 - 7,938 | 8,994 - 8,862 | 7,180 | 17,00 - 16,73 | 19,60 |
| M12 | 1,75 | 11,966 - 11,701 | 10,072 - 9,601 | 10,829 - 10,679 | 8,180 | 19,00 - 18,67 | 22,10 |
| M16 | 2,0 | 15,962 - 15,682 | 13,797 - 13,271 | 14,663 - 14,503 | 10,180 | 24,00 - 23,67 | 27,70 |
| M20 | 2,5 | 19,958 - 19,623 | 17,252 - 16,624 | 18,334 - 18,164 | 13,215 | 30,00 - 29,67 | 34,60 |
| M24 | 3,0 | 23,952 - 23,577 | 20,701 - 19,955 | 22,003 - 21,803 | 15,215 | 36,00 - 35,58 | 41,60 |
| M30 | 3,50 | 29,947 - 29,522 | 26,158 - 25,306 | 27,674 - 27,462 | 19,260 | 46,00 - 45,38 | 53,1 |
| M36 | 4,00 | 35,940 - 35,465 | 31,610 - 30,654 | 33,342 - 33,118 | 23,260 | 55,00 - 54,26 | 63,5 |
- Row 12 (M36): A/C prints "53,1" at M30 and "63,5" at M36 (one decimal place vs three elsewhere in the column) — as printed, not normalized
| Nominal size | Pitch | Major diameter D | Minor D1 max–min | Nut thickness Zn |
|---|---|---|---|---|
| M3 | 0,5 | 3,000 | 2,599 - 2,459 | 2,40 |
| M4 | 0,7 | 4,000 | 3,422 - 3,242 | 3,20 |
| M5 | 0,8 | 5,000 | 4,334 - 4,134 | 4,00 |
| M6 | 1,0 | 6,000 | 5,153 - 4,917 | 5,00 |
| M8 | 1,25 | 8,000 | 6,912 - 6,647 | 6,50 |
| M10 | 1,5 | 10,000 | 8,676 - 8,376 | 8,00 |
| M12 | 1,75 | 12,000 | 10,441 - 10,106 | 10,00 |
| M16 | 2,0 | 16,000 | 14,210 - 13,835 | 13,00 |
| M20 | 2,5 | 20,000 | 17,744 - 17,294 | 16,00 |
| M24 | 3,0 | 24,000 | 21,252 - 20,752 | 19,00 |
| M30 | 3,5 | 30,000 | 26,771 - 26,211 | 24,00 |
| M36 | 4,0 | 36,00 | 32,270 - 31,670 | 29,00 |
- Row 12 (M36): major diameter prints "36,00" (two decimals vs "3,000" pattern) at M36 — as printed
| Nominal size | Pitch | Major d max–min | Minor diameter max–min | Pitch diameter max–min | Bolt head thickness Zb | A/F max–min | A/C |
|---|---|---|---|---|---|---|---|
| M6 | 0,75 | 5,978 - 5,838 | 5,166 - 4,929 | 5,491 - 5,391 | 4,150 | 10,00 - 9,78 | 11,50 |
| M8 | 1,00 | 7,974 - 7,794 | 6,891 - 6,596 | 7,324 - 7,212 | 5,650 | 13,00 - 12,73 | 15,00 |
| M10 | 1,25 | 9,972 - 9,760 | 8,619 - 8,272 | 9,160 - 9,042 | 7,180 | 17,00 - 16,73 | 19,60 |
| M12 | 1,25 | 11,972 - 11,760 | 10,619 - 10,258 | 11,160 - 11,028 | 8,180 | 19,00 - 18,67 | 22,10 |
| M16 | 1,50 | 15,968 - 15,732 | 14,344 - 13,930 | 14,994 - 14,854 | 10,180 | 24,00 - 23,67 | 27,70 |
| M20 | 1,5 | 19,968 - 19,732 | 18,344 - 17,930 | 18,994 - 18,854 | 13,215 | 30,00 - 29,67 | 34,60 |
| M24 | 2,0 | 23,962 - 23,682 | 21,797 - 21,261 | 22,663 - 22,493 | 15,215 | 36,00 - 35,58 | 41,60 |
| M30 | 2,0 | 29,962 - 29,682 | 27,797 - 27,261 | 28,663 - 28,493 | 19,260 | 46,00 - 45,38 | 53,1 |
| M36 | 3,00 | 35,952 - 35,577 | 32,704 - 31,955 | 34,003 - 33,803 | 23,260 | 55,00 - 54,26 | 63,5 |
- Row 8 (M30): A/C prints "53,1" at M30 — as printed in table 1
| Nominal size | Pitch | Major diameter | Minor diameter max–min | Nut thickness Zn |
|---|---|---|---|---|
| M6 | 0,75 | 6,000 | 5,378 - 5,188 | 5,00 |
| M8 | 1,00 | 8,000 | 7,153 - 6,917 | 6,50 |
| M10 | 1,25 | 10,000 | 8,912 - 8,647 | 8,00 |
| M12 | 1,25 | 12,000 | 10,912 - 10,647 | 10,00 |
| M16 | 1,50 | 16,000 | 14,676 - 14,376 | 13,00 |
| M20 | 1,50 | 20,000 | 18,676 - 18,376 | 16,00 |
| M24 | 2,0 | 24,000 | 22,210 - 21,835 | 19,00 |
| M30 | 2,0 | 30,000 | 28,210 - 27,835 | 24,00 |
| M36 | 3,0 | 36,00 | 33,252 - 32,752 | 29,00 |
| Nominal size | Internal dia. max–min | External dia. max–min | Thickness max–min | Thin |
|---|---|---|---|---|
| M3 | 3,4 - 3,2 | 7,0 - 6,7 | 0,6 - 0,4 | - |
| M4 | 4,5 - 4,3 | 9,0 - 8,7 | 0,9 - 0,7 | - |
| M5 | 5,5 - 5,3 | 10,0 - 9,7 | 1,1 - 0,9 | - |
| M6 | 6,7 - 6,4 | 12,5 - 12,1 | 1,8 - 1,4 | 0,9 - 0,7 |
| M8 | 8,7 - 8,4 | 17,0 - 16,6 | 1,8 - 1,4 | 1,1 - 0,9 |
| M10 | 10,9 - 10,5 | 21,0 - 20,5 | 2,2 - 1,8 | 1,45 - 1,05 |
| M12 | 13,4 - 13,0 | 24,0 - 23,5 | 2,7 - 2,3 | 1,8 - 1,4 |
| M16 | 17,4 - 17,00 | 30,0 - 29,5 | 3,3 - 2,7 | 2,2 - 1,8 |
| M20 | 21,5 - 21,0 | 37,0 - 36,2 | 3,3 - 2,7 | 2,2 - 1,8 |
| M24 | 25,5 - 25,0 | 44,0 - 43,2 | 4,3 - 3,7 | 2,7 - 2,3 |
| M30 | 31,6 - 31,0 | 56,0 - 55,0 | 4,3 - 3,7 | 2,7 - 2,3 |
| M36 | 37,6 - 37,0 | 66,0 - 65,0 | 5,6 - 4,4 | 3,3 - 2,7 |
| Nominal size | Internal dia. max–min | External dia. max–min | Thickness max–min |
|---|---|---|---|
| M5 | 5,8 - 5,5 | 10,0 - 9,2 | 1,2 - 0,8 |
| M6 | 7,0 - 6,6 | 12,5 - 11,7 | 1,9 - 1,3 |
| M8 | 9,4 - 9,0 | 17,0 - 16,2 | 1,9 - 1,3 |
| M10 | 11,5 - 11,0 | 21,0 - 20,2 | 2,3 - 1,7 |
| M12 | 14,5 - 14,0 | 24,0 - 23,2 | 2,8 - 2,2 |
| M16 | 18,5 - 18,00 | 30,0 - 29,2 | 3,6 - 2,4 |
| M20 | 22,6 - 22,0 | 37,0 - 35,8 | 3,6 - 2,4 |
| M24 | 26,6 - 26,0 | 44,0 - 42,8 | 4,6 - 3,4 |
| M30 | 33,8 - 33,0 | 56,0 - 54,5 | 4,6 - 3,4 |
| M36 | 39,8 - 39,0 | 66,0 - 64,5 | 6,0 - 4,0 |
| M42 | 45,8 - 45,0 | 78,0 - 76,5 | 8,2 - 5,8 |
| M48 | 53,0 - 52,0 | 92,0 -90,0 | 9,2 - 6,8 |
Materials
- BS 3692 hardware on legacy drawings is typically carbon steel to the old BS strength markings or stainless where the environment demands; the current supply line manufactures to the ISO-equivalent geometry under the BS designation on request. When you RFQ a legacy callout, give the drawing reference and the environment — we quote the current-manufacture equivalent and flag any geometry divergence from the limits on this table
Ordering & documentation
Documents
Shipments of Legacy BS 3692 / BS 4320 Hexagon Bolts, Nuts and Washers are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Legacy BS 3692 / BS 4320 Hexagon Bolts, Nuts and Washers orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (Legacy BS 3692 / BS 4320 Hexagon Bolts, Nuts and Washers), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for legacy bs 3692 / bs 4320 hexagon bolts, nuts and washers is 10,000 pieces (applies to the standard sizes and finishes for legacy bs 3692 / bs 4320 hexagon bolts, nuts and washers; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for legacy bs 3692 / bs 4320 hexagon bolts, nuts and washers run 3–7 days. Quantities or variants of legacy bs 3692 / bs 4320 hexagon bolts, nuts and washers outside the standard range are confirmed at quotation.
Storage & shipping
Legacy BS 3692 / BS 4320 Hexagon Bolts, Nuts and Washers are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store legacy bs 3692 / bs 4320 hexagon bolts, nuts and washers dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Is a BS 3692 bolt interchangeable with its current ISO equivalent?
Largely yes on the wrench-facing geometry — the A/F ladder (5,50 at M3 through 55,00 at M36) matches the ISO wrench series, and the major/pitch diameter limits sit in the same tolerance system. The differences live at the edges: head heights and corner (A/C) values have small divergences from the current ISO hexagon tabulation, and BS 4320 washer ODs run differently from ISO 7089 at some sizes — enough that a mixed legacy/modern assembly should be checked against both ladders, not assumed. Practically: if the drawing names BS 3692, quote against the BS limits on this table and note the current-manufacture basis on the RFQ response; if the drawing permits "or equivalent", the ISO tabulation in the bolts family is the tighter current reference. Where the two standards disagree on a limit that matters to your joint (a counterbore, a clearance hole), the drawing callout governs — not either table.
What is the MOQ and lead time for Legacy BS 3692 / BS 4320 Hexagon Bolts, Nuts and Washers?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for Legacy BS 3692 / BS 4320 Hexagon Bolts, Nuts and Washers state?
State the full designation (Legacy BS 3692 / BS 4320 Hexagon Bolts, Nuts and Washers), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your Legacy BS 3692 / BS 4320 Hexagon Bolts, Nuts and Washers inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your Legacy BS 3692 / BS 4320 Hexagon Bolts, Nuts and Washers
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support