Bolt Clearance Hole Sizes, Inch (ASME B18.2.8) — Normal, Close, Loose

ASME B18.2.8 clearance hole chart for inch fasteners: normal, close and loose fit classes with nominal drill size and hole diameter min/max per screw size from #0 up the inch ladder.

Last updated: 2026-11

Request a Quote

Bolt Clearance Hole Sizes, Inch (ASME B18.2.8) — Normal, Close, Loose in an industrial setting
Illustrative image redrawn from real Bolt Clearance Hole Sizes, Inch (ASME B18.2.8) — Normal, Close, Loose product references — not a photograph of stocked items.

Specifications

Clearance holes are where tolerance discipline pays its rent: too tight and the bolt gets forced (and the hole drills oversized anyway), too loose and the joint squirms. The ASME B18.2.8 chart collected here tabulates the three fit classes per inch screw size — Normal (the default for standard assembly), Close (where alignment matters and drilled tooling is accurate), Loose (over punched holes, dirty work, insulation layers) — each with the nominal drill size and the hole diameter min/max band. The ladder opens at #0 (normal: #48 drill, 0.076-0.082 in hole) and runs up the inch series; a 1/2-in fastener takes a 17/32 normal drill with a 0.562/0.578 band. The drill-size column is the practical takeaway: it names the bit, the min/max band is the acceptance check on the drilled result.

Standard / scope ASME B18.2.8 clearance holes for inch fasteners — fit classes Normal, Close, Loose; per class nominal drill size and hole diameter min/max
Fit classes Normal (standard assembly default), Close (accurate alignment, drilled tooling), Loose (punched/oversize conditions, multi-layer stacks)
Reading the columns Per size: Nominal Drill Size (the bit to use) + Hole Diameter Min./Max. (the acceptance band) per fit class — stacked header rows carried as printed
Ladder start #0: normal #48 (0.076/0.082), close #51 (0.067/0.071), loose 3/32 (0.094/0.104) — the ladder continues up the inch series as tabulated
Not tabulated Metric fastener chart (separate page), csk/counterbore combinations — per RFQ
Bolt clearance hole sizes, inch fasteners, normal/close/loose fits (ASME B18.2.8) (table 1 of 1)Inch. Per fit class (Normal, Close, Loose): nominal drill size and hole diameter min/max. Stacked header rows carried as printed grid rows (title row, fit-class row, drill/hole split row, min/max row).
Clearance Hole Chart for Inch Fasteners
Nominal Screw SizeFit Class - NormalFit Class - CloseFit Class - Loose
Nominal Drill SizeHole DiameterNominal Drill SizeHole DiameterNominal Drill SizeHole Diameter
Min.Max.Min.Max.Min.Max.
#0#480.0760.082#510.0670.0713/320.0940.104
#1#430.0890.095#460.0810.085#370.1040.114
#2#380.1020.1083/320.0940.098#320.1160.126
#3#320.1160.122#360.1060.110#300.1280.140
#4#300.1280.135#310.1200.124#270.1440.156
#55/320.1560.1639/640.1410.14611/640.1720.184
#6#180.1700.177#230.1540.159#130.1850.197
#8#90.1960.203#150.1800.185#30.2130.225
#10#20.2210.228#50.2060.211B0.2380.250
1/49/320.2810.29017/640.2660.27219/640.2970.311
5/1611/320.3440.35421/640.3280.33423/640.3590.373
3/813/320.4060.41625/640.3910.39727/640.4220.438
7/1615/320.4690.47929/640.4530.46031/640.4840.500
1/29/160.5620.57217/320.5310.53839/640.6090.625
5/811/160.6880.69821/320.6560.66347/640.7340.754
3/413/160.8120.82425/320.7810.78929/320.9060.926
7/815/160.9380.95029/320.9060.9141-1/321.0311.051
11-3/321.0941.1061-1/321.0311.0391-5/321.1561.181
1-1/81-7/321.2191.2351-5/321.1561.1641-5/161.3121.337
1-1/41-11/321.3441.3601-9/321.2811.2911-7/161.4381.463
1-3/81-1/21.5001.5161-7/161.4381.4481-39/641.6091.634
1-1/21-5/81.6251.6411-9/161.5621.5721-47/641.7341.759
  • Empty trailing header cells under the 'Hole Diameter' sub-splits are the source's own stacked-header grid, carried verbatim.

Materials

  • The fit class is a joint decision, not a drill preference: specify it on the fabrication drawing and hold the drilled part to the min/max band here — a hole out of the loose band's max is a rejected hole, not a loose bolt. Punching produces oversize, drifted holes (loose-class territory); CNC drilling holds close-class. When the drawing is silent, normal fit is the standard's default — and stating "ASME B18.2.8 normal fit" on the RFQ removes the ambiguity that turns into reamed holes and shims on site

Ordering & documentation

Documents

Shipments of Bolt Clearance Hole Sizes, Inch (ASME B18.2.8) — Normal, Close, Loose are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Bolt Clearance Hole Sizes, Inch (ASME B18.2.8) — Normal, Close, Loose orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Bolt Clearance Hole Sizes, Inch (ASME B18.2.8) — Normal, Close, Loose), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for bolt clearance hole sizes, inch (asme b18.2.8) — normal, close, loose is 10,000 pieces (applies to the standard sizes and finishes for bolt clearance hole sizes, inch (asme b18.2.8) — normal, close, loose; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for bolt clearance hole sizes, inch (asme b18.2.8) — normal, close, loose run 3–7 days. Quantities or variants of bolt clearance hole sizes, inch (asme b18.2.8) — normal, close, loose outside the standard range are confirmed at quotation.

Storage & shipping

Bolt Clearance Hole Sizes, Inch (ASME B18.2.8) — Normal, Close, Loose are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store bolt clearance hole sizes, inch (asme b18.2.8) — normal, close, loose dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How do I choose between normal, close and loose fit for a clearance hole?

Start from how the hole is made and what the joint needs. Normal fit is the default: enough clearance for standard drilling across the tolerance stack of bolt and hole. Close fit (a drill only a few sizes up from the screw) is for jigs, fixtures and aligned flanges where play would show as misalignment — but it demands accurately drilled, not punched, holes. Loose fit (several sizes up) absorbs punched, drifted or multi-layer holes and thermal movement — structural work on oversized holes lives here, usually with washers to keep the bearing seat. The cost of guessing wrong runs both ways: close-fit ambitions on punched steel get you reaming, loose-fit habits on precision assemblies get you slop.

Why does the chart give both a drill size and a min/max hole diameter?

Because the drill size is the intent and the band is the acceptance. A jobber drill in a hand-held gun will not land exactly nominal — drill point wander, wear and wobble all cut oversize or off-axis — so the standard bounds what the resulting hole may measure: the min/max hole diameter per fit class. Fabrication QC checks the drilled hole (pin gauge or caliper) against that band, not against the drill number. The same logic is why a worn 17/32 bit drilling 1/2-in normal holes is a real finding: the hole can pass the drill number and still fail the band.

What is the MOQ and lead time for Bolt Clearance Hole Sizes, Inch (ASME B18.2.8) — Normal, Close, Loose?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for Bolt Clearance Hole Sizes, Inch (ASME B18.2.8) — Normal, Close, Loose state?

State the full designation (Bolt Clearance Hole Sizes, Inch (ASME B18.2.8) — Normal, Close, Loose), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Bolt Clearance Hole Sizes, Inch (ASME B18.2.8) — Normal, Close, Loose inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your Bolt Clearance Hole Sizes, Inch (ASME B18.2.8) — Normal, Close, Loose
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.