DIN 7500 D Hex Washer Head Thread Rolling Screws

DIN 7500 D hex washer head thread rolling screws: a wrenchable unslotted hex over an integrated washer face, on the trilobular rolling thread. The collected spec sheet tables M2.5 to M8 with hex width, head height, washer diameter and thickness — the forming screw for powered driving in brackets and heavy sheet.

Last updated: 2026-11

Request a Quote

DIN 7500 D Hex Washer Head Thread Rolling Screws in an industrial setting
Illustrative image redrawn from real DIN 7500 D Hex Washer Head Thread Rolling Screws product references — not a photograph of stocked items.

Specifications

Where a TORX or cross recess would cam out at forming torque, the DIN 7500 D takes an external hex: an unslotted hexagon head over an integrated washer face that spreads the bearing load and covers the pilot hole. The collected spec sheet tables the series from M2.5 to M8 — hex width across flats follows the familiar metric hex ladder (5.5 mm at M3 up to 13 mm at M8), so standard sockets work. The washer face thickness grows from 0.6 to 1.3 mm across the range. Pilot-hole pairing from the same sheet: M3 turns into a 2.75 mm hole in a 3.0 mm test plate; M8 into 7.4 mm in 8.0 mm plate. This variant is the usual choice when assembly stations drive by impact or high-torque tooling and the assembly still needs a formed, chipless thread.

Standard DIN 7500 D — unslotted hex washer head trilobular thread rolling screw
Size range M2.5 – M8; thread pitch 0.45 (M2.5) to 1.25 (M8)
Hex at M3 Width across flats 5.50 / 5.32 mm; head height 2.00 / 1.52 mm; washer diameter 7.10 / 6.60 mm; washer thickness 0.6 mm
Hex at M6 Width across flats 10.00 / 9.78 mm; head height 5.20 / 4.50 mm; washer diameter 13.00 / 12.00 mm; washer thickness 1.05 mm
Hex at M8 Width across flats 13.00 / 12.73 mm; head height 7.05 / 6.30 mm; washer diameter 17.00 / 16.40 mm; washer thickness 1.3 mm
Pilot holes Sheet pairs test plate to hole by size: M2.5 in 2.5 mm plate → 2.3 mm hole; M3 in 3.0 mm → 2.75 mm; M4 in 4.0 mm → 3.6 mm; M5 in 5.0 mm → 4.6 mm; M6 in 6.0 mm → 5.5 mm; M8 in 8.0 mm → 7.4 mm

Materials

  • Case-hardened steel
  • A2 stainless steel

Ordering & documentation

Documents

Shipments of DIN 7500 D Hex Washer Head Thread Rolling Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 7500 D Hex Washer Head Thread Rolling Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 7500 D Hex Washer Head Thread Rolling Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for din 7500 d hex washer head thread rolling screws is 10,000 pieces (applies to the standard sizes and finishes for din 7500 d hex washer head thread rolling screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 7500 d hex washer head thread rolling screws run 3–7 days. Quantities or variants of din 7500 d hex washer head thread rolling screws outside the standard range are confirmed at quotation.

Storage & shipping

DIN 7500 D Hex Washer Head Thread Rolling Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 7500 d hex washer head thread rolling screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why a hex washer head on a forming screw?

Forming torque is the peak torque in the joint's life. An external hex transfers it without the drive-socket wear limits of an internal recess, and the integrated washer face spreads the bearing load while covering the pilot hole. The collected table shows the hex sizes tracking the standard metric hex ladder (5.5 mm at M3, 10 mm at M6, 13 mm at M8), so existing sockets drive the screw without dedicated bits.

Which pilot hole does the hex washer series need?

The spec sheet pairs each size with a test-plate thickness and hole diameter: M2.5 in 2.5 mm plate takes 2.3 mm, M4 in 4.0 mm plate takes 3.6 mm, M8 in 8.0 mm plate takes 7.4 mm. These are guideline values for the sheet thickness the table assumes — adjust for your actual substrate and confirm on samples, as with the rest of the DIN 7500 family.

What is the MOQ and lead time for these thread forming screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these thread forming screws state?

State the standard designation (for example DIN 7500 CE or DIN 7500 ME), the head form and drive, thread size and pitch, length, material and grade (case-hardened steel or A2/A4 stainless), finish, pilot-hole or sheet thickness if you need a hole-size recommendation, required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 7500 D Hex Washer Head Thread Rolling Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your DIN 7500 D Hex Washer Head Thread Rolling Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.