TX32 6-Lobe Pin TX Security Grub Screw — Flat Point
Flat point 6-lobe pin security grub screw, M1.6–M24 as tabulated: min socket depth t 0.8–6.8 mm, socket width s 1.75–13.45 mm (M3 upward), tools TX6–TX60. Metric matrix marked available 2–190 mm (longest M10 to 190 mm); steel, A2 and A4 stainless as standard. Imperial matrix markers undefined by the collected legend — imperial lengths at quotation.
Last updated: 2026-11
Specifications
TX32 is the gentlest of the grub points and the deepest-reaching: a flat, square-ended tip that distributes its compressive holding force evenly instead of digging in, which is what you want against soft materials, ground flats and any surface where a cup point’s bite would be damage. The collected page names exactly those uses, and adds the drive argument it shares with the whole pin-TX line — no cam-out at maximum torque, medium security from the centre pin, installed and removed only with the matched insert bit. The tabulated range is the broadest in this batch: M1.6 through M24, with socket depth and socket width figures starting at M3 (the M1.6–M2.5 columns carry dashes, so no tool claims are made for them), and a metric availability matrix marked available from 2 mm to 190 mm — M10 alone running the full 190 mm, with M12/M16 covering to 120 mm and the M24 column stopping at 100 mm. The imperial table (No.2-56 through 3/8-16, 1/8″–2″) is tabulated but its cell markers are an icon the page’s legend does not define, so imperial availability stays at quotation. Supply is stated in steel, A2 and A4 stainless steel as standard.
| Designation | TX32 — flat point security grub screw (set screw), 6-lobe pin TX drive, headless, fully threaded; flat tip spreads compression evenly, suits soft materials and ground flats; reusable two-way, medium security |
|---|---|
| Thread range (tabulated) | M1.6, M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M16, M20, M24 (t/s/tool tabulated from M3; M1.6–M2.5 dash — no tool claims for those sizes) |
| Min socket depth t (mm) | M3 0.8 · M4 1 · M5 1.3 · M6 1.6 · M8 2.7 · M10 2.9 · M12 3.2 · M16 4.3 · M20 5.3 · M24 6.8 |
| Socket width s (mm) | M3 1.75 · M4 2.4 · M5 2.8 · M6 3.35 · M8 4.5 · M10 5.6 · M12 6.75 · M16 8.95 · M20 11.35 · M24 13.45 |
| Tool size (collected) | TX6 (M3) · TX8 (M4) · TX10 (M5) · TX15 (M6) · TX25 (M8) · TX30 (M10) · TX40 (M12) · TX50 (M16) · TX55 (M20) · TX60 (M24) |
| Length availability (as marked, metric) | 2–190 mm matrix marked available: M1.6–M2 to 10 mm · M2.5 to 16 mm · M3 to 40 mm · M4 to 50 mm · M5 to 80 mm · M6–M10 to 100 mm+ (M10 to 190 mm, M12 to 120 mm) · M16 to 120 mm · M20 to 100 mm · M24 to 100 mm; unmarked gaps (e.g. 18 mm row) at quotation — legend: black-triangle marker = available |
| Length axis (imperial, unclaimed) | imperial matrix tabulates No.2-56–3/8-16 × 1/8″–2″, but its cell markers are not defined by the collected legend — imperial pairs at quotation |
| Standard materials | Steel, A2 stainless steel, A4 stainless steel; other materials and finishes on request |
Materials
- Steel (standard)
- A2 stainless steel (standard)
- A4 stainless steel (standard)
- Other materials and finishes on request
Ordering & documentation
Documents
Shipments of TX32 6-Lobe Pin TX Security Grub Screw — Flat Point are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for TX32 6-Lobe Pin TX Security Grub Screw — Flat Point orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (TX32 6-Lobe Pin TX Security Grub Screw — Flat Point), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for tx32 6-lobe pin tx security grub screw — flat point is 10,000 pieces (applies to the standard sizes and finishes for tx32 6-lobe pin tx security grub screw — flat point; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for tx32 6-lobe pin tx security grub screw — flat point run 3–7 days. Quantities or variants of tx32 6-lobe pin tx security grub screw — flat point outside the standard range are confirmed at quotation.
Storage & shipping
TX32 6-Lobe Pin TX Security Grub Screw — Flat Point are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store tx32 6-lobe pin tx security grub screw — flat point dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Flat point versus cup point — what actually changes at the tip?
How the holding force lands. The flat point presses a full flat circle against the surface, so nothing digs in — right for a hardened and ground shaft, a soft plastic boss, or a part that gets adjusted repeatedly, because there is no crescent-shaped bite to wear into a lip. Cup point (TX28) deliberately digs a shallow ring for maximum rotation resistance on surfaces that can take the mark. If your set screw sits against a machined flat, flat point is the pairing the geometry assumes; if it must never slip on a rougher surface, cup wins.
How far does the range actually go?
Farther than most buyers will ever need: the metric matrix marks available from 2 mm to 190 mm of length, with M10 the deepest at 190 mm and M24 marked to 100 mm. Thread sizes M1.6 through M24 are tabulated, though the three smallest sizes carry no socket depth or tool figures on the source table — those are quotation lines for dimensions as well as availability. Imperial sizes are tabulated to 2″ but their markers are not defined by the collected legend, so treat imperial as confirm-at-quotation.
What should an RFQ for TX32 state?
State the designation (TX32 6-lobe pin TX flat point grub screw), thread size and length, material (steel, A2 or A4 stainless as standard), the mating surface (flat against ground flats, soft material call it out), quantity per size, and required TX-series bits. If you need imperial sizes, ask for stock confirmation per pair — the source tabulates them without a legend-defined availability marker.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your TX32 6-Lobe Pin TX Security Grub Screw — Flat Point inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your TX32 6-Lobe Pin TX Security Grub Screw — Flat Point
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support