Chemical Resistance Table for Screws in A2 and A4

A 100-plus-agent corrosion-resistance table for A2 (304-type) and A4 (316-type) stainless fasteners, rated 0-3 with a pitting flag L per agent, concentration and temperature — from acetone to sulphuric acid fuming, including the rows where the two grades genuinely differ (chlorides, reducing acids, brines) and the many where they do not.

Last updated: 2026-11

Request a Quote

Chemical Resistance Table for Screws in A2 and A4 in an industrial setting
Illustrative image redrawn from real Chemical Resistance Table for Screws in A2 and A4 product references — not a photograph of stocked items.

Specifications

A2 versus A4 is the most common stainless decision on a fastener RFQ, and it is decided agent by agent, not by a blanket "marine grade" label. This table — two 58-row blocks covering one alphabetical agent list from effluent water and acetone through potassium salts, mixed nitrating acids and wine — rates each agent for A2 and A4 separately on the collected source's five-point scheme: 0 resistant (but see L), 1 slight attack usable in certain areas, 2 hardly any resistance, 3 practically unusable, and L flagged where pitting threatens even in a resistant class. The rows that repay careful reading are the divergent ones: acetyl chloride (A2 rates 1 at boiling, A4 rates 0), aluminium chloride 5% at 50° (A2 rates 2, A4 rates 1), sodium chloride saturated (A2 pits at hot saturation — rated 1 — while A4 holds 0 cold but still rates 1 at 100°), oleic acid with sulphuric traces (2 vs 1), sauerkraut brine (2 vs 1), fuming sulphuric acid ladders and sulphurous acid under pressure (A4 holds 0 where A2 rates 1-2), spinning bath liquor (2 vs 1) and water vapour with SO2. Just as instructive are the many 0/0 rows: for most organics, alkalis and food products the grades are interchangeable. Multi-value cells print compounds on one line on the collected page (e.g. "0 1 2 0 2" across paired concentrations), carried verbatim — read them against the concentration column's own line breaks rather than assuming alignment.

Rating scheme (source) 0 = resistant (but see L); 1 = slight attack, usable in certain areas; 2 = hardly any resistance at all, practically unusable; 3 = no resistance; L = danger of pitting even in resistant class
Coverage Two 58-row blocks, one continuous alphabetical agent list: water types, organics (acetone, alcohols, acids), salts (chlorides, cyanides, sulphates), mineral acids (nitric, sulphuric incl. fuming, hydrochloric), alkalis, food products, process liquors (spinning bath, dyer's bath, sauerkraut brine) and atmospheres (water vapour ± SO2/CO2)
Where A4 earns its premium Chloride-bearing and reducing agents: acetyl chloride, aluminium chloride, ammonium chloride ladders, bleaching solution, sodium chloride at heat, oleic acid + H2SO4 traces, fuming sulphuric ladders, sulphurous acid under pressure, spinning bath, sauerkraut brine — A4 rates one or more steps better on each
Where the grades tie Most organics and alkalis rate 0/0 (acetone, caustic potash up to 50%, milk of lime, sugar solution, wine) — grade selection there can follow availability or thread-form needs rather than corrosion
Verbatim quirks (flagged) Compound cells print multi-ratings on one line ("0 1 2 0 2"); "boiling20°" and "00" concatenations carry as printed; "–" prints no concentration; the "NaCl O2 / NaOH" compound row label and its "2 3 02 / 2 2 02" ratings are the source's own characters
Not a substitute for Joint-specific corrosion engineering: concentration, temperature, aeration, crevice geometry and stress state all shift real service behaviour — treat ratings as screening, and confirm critical duty per RFQ
Chemical resistance of A2 / A4 stainless fasteners — agents A–K (first block)As printed; 58 rows on the collected page. Rating legend from the collected page: 0 = resistant (but see L); 1 = slight attack, usable in certain areas; 2 = hardly any resistance at all, practically unusable; 3 = no resistance; L = danger of pitting even in resistant class. "–" prints no concentration; blank cells print no value; compound ratings print as printed (e.g. "0 0" across paired concentrations/temperatures on one line).
Corrosive AgentConcentrationTemp °CMaterial
A2A4
Effluent water (with traces of sulphuric acid)–up to 40°00
Acetone CH3COCH3all concentrations20°00
Acetyl chloride Ch3CoCl–boiling10
Aluminium Almolten 750°33
Aluminium Chloride L Al Cl3,6H2O5%50°21
Formic Acid H•COOH10% 15% 100%20° 20° 20°0 0 00 0 0
Ammonia NH3––00
Ammonium chloride (sal ammoniac) L NH4OH10% 25% 50% cold and hot saturatedboiling boiling boiling 20° boiling0 1 2 0 20 1 1 0 1
Ammonium hydroxide NH4OHall20° boiling00
Ammonium perchlorate L NH4CIO410%20° boiling0 00 0
Aniline C6H7NH220°00
Malic acid (COOH)2CH2CH OHup to 50%20°00
Cider–20°00
Ethyl alcohol (ethanol) C2H5OHall concentrations20°00
Ethyl ether (C2H5)2•O–boiling00
Atmosphere––00
Petrolall concentrations20°00
Benzoic acid C6H5CO O OHall concentrations20°00
Beer–20°00
Blood––00
Spirits–20°00
Bromine Br L–20° boiling3 33 3
Buttermilk–20°00
Butyric acid C3H7COOh100%20°00
Chlorine Cl Gas in dry state Gas in moist state L– –20° 20° 100°0 3 30 3 3
Chloride of lime L Ca (IO)2, CaO, 2 H2O Bleaching solutiondry moist 2.5g Cl/l20° 20° 20°0 1 10 1 0
Chloroform CH CL3water free20°00
Chlorine water L =cold water saturated with water–20°11
Hydrogen chloride gas L HCI– – – –20° 50° 100° 400°1 1 2 31 1 1 3
Chromic oxide CrO310% pure 50% pure20° 20°0 10 1
Ferrogallic ink L–20°00
Iron phosphate solution, bonder process–98°00
Mineral oil–20°00
Vinegar = spirit vinegar–20°00
Acetic acid CH3COOH10% 50%20° 20°0 00 0
Glacial acetic acide boiling100%20° boiling0 10 1
Acetic acid + hydrogen peroxide CH3COOH + H2O210 u. 50%20° 50° 90°0 0 00 0 0
Dyer's bath alkaline or neutral organically acid slightly sulphuric acid or organically acid + sulphuric acid (H2SO4 below 1%)– – –20° boiling boiling20° boiling0 0 00 10 0 00
Oleic acid C17H33COOH30 bar technical150°00
Oleic acid + traces H2SO4–hot21
Meat––00
Hydrofluoric acid = hydrogen fluoride H2 F240%20°33
Fruit juices and fruit acids–20°00
Vegetables–boiling00
Tannic acid = tannin5%20°00
Glycerin C3 H5 (OH)3conc.20° boiling0 00 0
Pit wateracid20°00
Urine L–20°00
Iodine I Ldry moist20° 20°0 10 0
Coffee–20° boiling0 00 0
Potassium aluminium sulphate = alum KAL(SO4)2, 12H2O)10%20°00
Potassium chloride L K Clhot saturated20° boiling0 00 0
Potassium ferricyanide = red prussiate of potash K3(Fe[CN]6)–000
Potassium ferrocyanide = yellow prussiate or potash K4[Fe(CN)6], 3 H2O)–20° boiling0 00 0
Potassium hydroxide = caustic potash solution20%20°00
Caustic potash KOH50%20°00
Chemical resistance of A2 / A4 stainless fasteners — agents K–Z (second block)As printed; legend and rating conventions as the first block. The two blocks are one continuous agent list split into two tables on the collected page.
Corrosive AgentConcentrationTemp °CMaterial
A2A4
Potassium permanganate K Mn O4all concentrations20° boiling0 00 0
Calcium chloride L CaCL2, 6H2Ocold saturated20°00
Calcium hydroxide Ca(OH)2 = milk of lime–20°00
Cheese–20%00
Carbon dioxide = carbonic acid CO2dry moisthot hot0 00 0
Carbon tetrachloride C CL4water free20°00
Aqua regia L H CL + HNO3–20°33
Cupric sulphate CuSO4, 5H20 = copper vitriol +3% H2SO4all concs.20° boiling 20° boiling0 0 0 00 0 0 0
Glue (including acid)–boiling00
Linseed oil +3% H2SO4–20° 200°0 00 0
Magnesium sulphate MgSO4, 7H2O = Epsom saltsconcentrated20°00
Methyl alcohol CH3OHall concentrations20°00
Milkfresh sourup to 70° c up to 70° C0 00 0
Lactic acid CH3 CHOH COOH1.5% 80%20° 20°0 00 0
Mixed acids (nitrating acids)50% H2SO4 +50% HNO3 75% H2SO4 +25% HNO3 20% H2SO4 +15% HNO3 70% H2SO4 + 10% HNO3 30% H2SO4 +5% HNO350 ° 50 ° 50 ° 50° 50 °0 1 0 0 00 0 0 0 0
Monochloracetic acid L CH2 Cl COO H50%20°11
Sodium chloride L NaCl = cooking saltcold saturated hot saturated20° 100° 100°0 1 10 0 1
Sodium chloride L Na Cl O2 Sodium hydroxide =caustic soda solution =caustic soda NaOH5% 25% 50%20° boiling 20°boiling2 3 022 2 02
Sodium hypochlorite L NaClO =bleaching solution5%20° boiling1 11 1
Sodium carbonate Na2 CO3, 10 H2O10% cold saturatedboiling00
Sodium sulphate Na2 SO4, 10 H2Ocold saturated20°00
Novacaine–20°00
Fruit pulp containing SO2––00
Oil (lubricating oil)–20°00
Oil (vegetable)–20°00
P3 washing agent–95°00
Persil–20° and boiling00
Petroleum–20°00
Phosphoric acid H3PO4 chemically pure1% 10% 45% 60%20 ° 20 ° 20 ° 20 °0 0 0 00 0 0 0
Photographic developer (Agfa-glyzin developer)–20 °00
Photographic fixing bath L–20 °00
Pickling brine L–20 °00
Nitric acid HNO37% 10% 25% 37% 50%20 ° 20 ° 20 ° 20 ° 20 °0 0 0 0 00 0 0 0 0
Hydrochloric acid L HCl0.5%20 ° boiling1 31 3
Sauerkraut brine L––21
Lard–20 °00
Soft Soap–20 °00
Sulphur, dryfused130°00
Carbon disulphide C S2–20°00
Sulphuric acid H2SO4 fuming (11% free SO3) fuming (60% free SO3)1% 2.5% 5% 7.5% 10% 20% 80% 98% =concentrated – –20° boiling 20° boiling 20° boiling 20 ° boiling 20 ° 20 ° 20 ° 70° 20° 70°20° 100° 20° 80°1 1 1 2 1 3 1 2 2 1 1 3 0 20 1 0 00 1 0 2 0 2 0 2 1 1 1 2 0 20 0 0 0
Hydrogen sulphide dry H2S<420°00
Sulphurous acid H2 S O2saturated 4 bar 5-8 bar 10-20 bar20° 135° 160° 180-200°0 1 2 20 0 1 1
Schweinfurt green 3 Cu (As O2)3, Cu (CH3 COO)2–20°00
Sea Water L–20°00
Soap–20°00
Mustard L–20°00
Spinning bathup to 10% H2SO470°21
Tar (pure)–20° and hot00
Turpentine–20° and hot00
Vaseline–20° and hot00
Water Tap water Pit water = acidic water–20° 20°0 00 0
Water vapour Water vapour with SO2 Water vapour with CO2– – –400° – –0 1 00 0 0
Wine (white and red)–20° and hot0 00 0
Tartaric acid COOH (CHOH)2 COOH10% 50%20° 20°0 00 0
Lemon juice Citric acid HO C(CH2 COOH)2, COOH, H2)– 1% 10% 25% 50%20° 20° 20° 20° 20°0 0 0 0 00 0 0 0 0
Sugar solution–20° boiling0 00 0

Materials

  • A2 is the general-purpose austenitic (304 family); A4 adds molybdenum (316 family) for chloride and reducing-acid duty. We supply both grades across the screw range with material certificates; where an agent here rates 2 or 3, moving grade is cheaper than moving maintenance schedule — but crevices, gasket joints and chlorinated wash-downs can defeat even a good table rating, so name the actual medium and temperature on the RFQ

Ordering & documentation

Documents

Shipments of Chemical Resistance Table for Screws in A2 and A4 are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Chemical Resistance Table for Screws in A2 and A4 orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Chemical Resistance Table for Screws in A2 and A4), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for chemical resistance table for screws in a2 and a4 is 10,000 pieces (applies to the standard sizes and finishes for chemical resistance table for screws in a2 and a4; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for chemical resistance table for screws in a2 and a4 run 3–7 days. Quantities or variants of chemical resistance table for screws in a2 and a4 outside the standard range are confirmed at quotation.

Storage & shipping

Chemical Resistance Table for Screws in A2 and A4 are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store chemical resistance table for screws in a2 and a4 dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

The table rates sodium chloride 0 for A4 cold-saturated but 1 at 100°. What does that mean for outdoor or wash-down hardware?

It captures the real failure mode: chloride pitting is temperature- and concentration-driven, so an A4 (316-type) screw that shrugs off cold brine can still pit in a hot, evaporating corner — a heated tank rim, a crevice under a gasket where salt concentrates, or a wash-down line that dries slowly. The L flag on the chloride rows is the table's own warning that even a resistant rating carries pitting risk in crevice geometry, because crevices locally concentrate chloride beyond the bulk concentration the rating was measured at. Practical reading for hardware selection: cold, rinsed, aerated salt exposure → A2 may serve, though A4 is the standard specifier's choice wherever spray or splash zones exist; hot or evaporating salt duty, or creviced joints in brine → treat the A4 rating as conditional and consider the task beyond the table — crevice-free detailing, periodic rinsing, or a higher-alloy grade quoted per RFQ. Ratings screen materials; they do not certify a joint.

Most rows are 0 for both grades. When can I legitimately skip the A4 premium?

When your medium sits in the 0/0 rows and no L flag applies — the organics, alkalis and food products that dominate many plants: caustic solutions up to 50%, milk of lime, acetone and the alcohol families, sugar solutions, wine and food acids at room temperature. In those duties the corrosion performance of A2 and A4 is equivalent by the table's own ratings, and the choice can follow what actually differentiates the grades on your order: availability, price, certification scope (some food and pharma specs name A4 by default regardless), or thread durability. Two cautions before skipping the premium: first, check the temperature column — several 0/0 ratings carry "20°" only, and the same agent at heat can diverge (sodium chloride is the canonical case); second, check the system, not just the agent — a "benign" product line still sees chloride-containing cleaning chemicals, and the fastener sees the cleaning cycle too. If your service sits inside one row of this table, use the row; if it spans several, quote per RFQ with the full medium list.

What is the MOQ and lead time for Chemical Resistance Table for Screws in A2 and A4?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for Chemical Resistance Table for Screws in A2 and A4 state?

State the full designation (Chemical Resistance Table for Screws in A2 and A4), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Chemical Resistance Table for Screws in A2 and A4 inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your Chemical Resistance Table for Screws in A2 and A4
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.