DIN 7500 CE Pan Head Thread Forming Screws

DIN 7500 CE pan head thread forming screws: the trilobular rolling thread under a rounded pan head with a six-lobe (Torx) or Pozidriv drive. The collected DIN 7500CE table runs M2 to M6 with head, recess and drive dimensions per size — the chipless forming screw for enclosures, sheet-metal frames and visible assemblies.

Last updated: 2026-11

Request a Quote

DIN 7500 CE Pan Head Thread Forming Screws in an industrial setting
Illustrative image redrawn from real DIN 7500 CE Pan Head Thread Forming Screws product references — not a photograph of stocked items.

Specifications

The CE variant is DIN 7500 with a pan head: a rounded top and cylindrical sides over a flat bearing face, driven by a six-lobe socket or a Pozidriv cross recess. The pan head spreads the bearing load and keeps the drive accessible through several cam-outs, which suits electrical enclosures, sheet-metal frames and any assembly where the head stays visible. The collected DIN 7500CE spec sheet carries the full head table for the six-lobe version from M2 to M6 plus the Pozidriv variant from M2.5 to M6; the trilobular thread geometry and performance figures are shared with the DIN 7500-1 rolling-screw page. Ordering note: the same rolling thread comes under the ME countersunk head when the assembly needs a flush finish.

Standard DIN 7500 CE — pan head thread forming screw; collected table titled "Six-Lobe Pan Head DIN 7500TX Head per DIN 7500CE"
Size range M2 – M6 (six-lobe table); Pozidriv variant table M2.5 – M6
Head at M3 Head diameter 5.6 / 5.3 mm; height 2.40 / 2.26 mm; recess diameter ref 2.8 mm; penetration 0.88 / 0.56 mm; drive T10
Head at M5 Head diameter 9.50 / 9.14 mm; height 3.70 / 3.52 mm; recess diameter ref 4.5 mm; penetration 1.78 / 0.90 mm; drive T25
Six-lobe drive map T6 (M2), T8 (M2.5), T10 (M3), T15 (M3.5), T20 (M4), T25 (M5), T30 (M6)
Pozidriv variant M2.5–M6: head diameter 5–12 mm, head height 2–4.75 mm, recess depth m~ 2.6–6.7 mm, drive PZ1–PZ3

Materials

  • Case-hardened steel
  • A2 stainless steel

Ordering & documentation

Documents

Shipments of DIN 7500 CE Pan Head Thread Forming Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 7500 CE Pan Head Thread Forming Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 7500 CE Pan Head Thread Forming Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for din 7500 ce pan head thread forming screws is 10,000 pieces (applies to the standard sizes and finishes for din 7500 ce pan head thread forming screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 7500 ce pan head thread forming screws run 3–7 days. Quantities or variants of din 7500 ce pan head thread forming screws outside the standard range are confirmed at quotation.

Storage & shipping

DIN 7500 CE Pan Head Thread Forming Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 7500 ce pan head thread forming screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Six-lobe or Pozidriv for DIN 7500 CE?

Both drives exist in the collected DIN 7500CE tables. The six-lobe socket takes higher torque with less cam-out, which matters near the maximum screw-in torque of the forming thread; Pozidriv matches standard cross-recess tooling already on the line. Match the driver to your assembly station first — the head dimensions differ slightly between the two tables, so treat them as distinct part configurations when qualifying.

Where does the pan head make sense on a forming screw?

Anywhere the head sits above the surface: enclosures, brackets, sheet-metal frames, serviceable covers. The pan head gives a deep, well-supported drive recess and a wide bearing face without needing a countersunk hole. When the head must sit flush — panels, covers with clearance above — switch to the DIN 7500 ME countersunk variant of the same rolling thread.

What is the MOQ and lead time for these thread forming screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these thread forming screws state?

State the standard designation (for example DIN 7500 CE or DIN 7500 ME), the head form and drive, thread size and pitch, length, material and grade (case-hardened steel or A2/A4 stainless), finish, pilot-hole or sheet thickness if you need a hole-size recommendation, required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 7500 CE Pan Head Thread Forming Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your DIN 7500 CE Pan Head Thread Forming Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.