DIN 7996 Cross Recessed Pan Head Wood Screws
DIN 7996 cross recessed pan head wood screws, No. 2 to No. 8: shank and head geometry, type H/Zi recess depths and the commercial length ladder to 80 mm.
Last updated: 2026-11
Specifications
DIN 7996 is the pan head wood screw with cross recess — the domed bearing head for timber joints where the screw stands proud deliberately (bracket fixings, hinge plates over pre-drilled holes, board-to-frame work where the head bears on a metal or hard part rather than sinking into wood). The collected tables run sizes 2 to 8 with shank ds max=nom (2016 edition) / ds min, head diameter dk nom, head height k nom and the cross recess data — recess number plus the approximate m depths for type H (Phillips) and type Zi (Pozi) drivers (≈m type Zi 2.4 at size 2.5 to 6.2 at size 8) — and the commercial length ladder 10 to 80 mm with its mass table. As with DIN 7995, the source prints the superseded 12/2010 edition as a separate table (whose first row carries ds min only) and both are transcribed verbatim.
| Standard / scope | DIN 7996 cross recessed pan head wood screws — sizes 2 to 8, edition 12/2016 (supersedes 12/2010; the superseded edition is transcribed as a separate table) |
|---|---|
| Shank / head | ds max=nom and ds min per size (2010 edition prints ds min only); pan head dk nom; head height k nom |
| Cross recess | Recess number per size; approximate m depths for type H and type Zi drivers (Zi ≈2.4 at size 2.5 → ≈6.2 at size 8) |
| Commercial lengths l | Ladder 10 to 80 mm; approximate mass per 1000 pcs (ρ=7,85 kg/dm³) tabulated per size/length |
| Not tabulated | Point type, material, finish — per RFQ |
| thread size | 2 | 2.5 | 3.0 | 3.5 | 4.0 | 4.5 | 5.0 | 5.5 | 6.0 | 7 | 8 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ds max= nom | 2 | 2.5 | 3 | 3.5 | 4 | 4.5 | 5 | 5.5 | 6 | 7 | 8 |
| ds min | 1.6 | 2.1 | 2.6 | 3.02 | 3.52 | 4.02 | 4.52 | 5.02 | 5.52 | 6.42 | 7.42 |
| dk nom | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 14 | 16 |
| k nom | 1.4 | 1.7 | 2.1 | 2.35 | 2.8 | 3.1 | 3.5 | 3.8 | 4.2 | 4.9 | 5.6 |
| Cross recess nr | 0 | 1 | 1 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 4 |
| ≈ m (type H) | - | 2.3 | 2.7 | 3.7 | 4.1 | 4.4 | 4.8 | 6.2 | 6.6 | 7.3 | 8.8 |
| ≈ m (type Zi) | - | 2.4 | 2.9 | 3.9 | 4.1 | 4.3 | 4.7 | 6.2 | 6.7 | 7 | 8.5 |
- Source spanning title row carried verbatim: "Dimensions in mm - source DIN 7996".
- Edition row carried from the source grid: "Publication date: 12/2016 - Supersedes DIN 7996: 12/2010".
- Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (11/12) — grid padded empty; per-row pre-pad widths: 11,11,12,12,12,12,12,12,12,12.
| thread size | 2 | 2.5 | 3.0 | 3.5 | 4.0 | 4.5 | 5.0 | 5.5 | 6.0 | 7 | 8 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ds min | 1.6 | 2.1 | 2.6 | 3.02 | 3.52 | 4.02 | 4.52 | 5.02 | 5.52 | 6.42 | 7.42 |
| dk nom | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 14 | 16 |
| k nom | 1.4 | 1.7 | 2.1 | 2.35 | 2.8 | 3.1 | 3.5 | 3.8 | 4.2 | 4.9 | 5.6 |
| Cross recess nr | 0 | 1 | 1 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 4 |
| ≈ m (type H) | - | 2.3 | 2.7 | 3.7 | 4.1 | 4.4 | 4.8 | 6.2 | 6.6 | 7.3 | 8.8 |
| ≈ m (type Zi) | - | 2.4 | 2.9 | 3.9 | 4.1 | 4.3 | 4.7 | 6.2 | 6.7 | 7 | 8.5 |
- Source spanning title row carried verbatim: "Dimensions in mm - source DIN 7996".
- Edition row carried from the source grid: "Publication date: 12/2010 - Supersedes DIN 7996: 12/1986" — superseded edition table transcribed verbatim alongside the current one.
- Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (11/12) — grid padded empty; per-row pre-pad widths: 11,11,12,12,12,12,12,12,12.
| d thread size | 2 | 2.5 | 3 | 3.5 | 4 | 4.5 | 5 | 5.5 | 6 | 7 | 8 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| nominal length l | |||||||||||
| 10 | 0.46 | 0.76 | 1.03 | ||||||||
| 12 | 0.52 | 0.86 | 1.16 | 1.63 | |||||||
| 16 | 0.64 | 1.04 | 1.41 | 1.93 | 2.51 | 3.31 | |||||
| 20 | 0.76 | 1.23 | 1.68 | 2.24 | 2.88 | 3.78 | |||||
| 25 | 0.91 | 1.47 | 1.98 | 2.62 | 3.37 | 4.37 | |||||
| 30 | 1.06 | 1.7 | 2.29 | 3.01 | 3.85 | 5 | |||||
| 35 | 1.94 | 2.6 | 3.39 | 4.34 | 5.55 | ||||||
| 40 | 2.18 | 2.91 | 3.77 | 4.83 | 6.14 | 9.17 | |||||
| 45 | 3.22 | 4.12 | 5.31 | 6.73 | 10 | ||||||
| 50 | 4.5 | 5.8 | 7.32 | 10.8 | |||||||
| 60 | 6.77 | 8.54 | 12.5 | ||||||||
| 70 | 9.72 | 14.2 | |||||||||
| 80 | 10.9 | 16 |
- Source spanning title row carried verbatim: "DIN 7996 - 1986 ≈ weigth in kg x1000 pcs, (ρ=7,85 kg/dm 3 ) - commercial items".
- Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (12/1/5/6/8/10) — grid padded empty; per-row pre-pad widths: 12,12,1,5,6,8,8,8,8,8,10,10,10,10,10,10.
Materials
- Same wood-screw materials discipline: zinc-plated steel for interior, A2/A4 stainless or coated for exterior, brass for decorative work. Pan head means the head clamps onto whatever is under it — state if that is metal (washer-face requirements) or timber, since head bearing is the joint element here; and confirm H (Phillips) vs Zi (Pozi) tooling from the m columns before volume orders
Ordering & documentation
Documents
Shipments of DIN 7996 Cross Recessed Pan Head Wood Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 7996 Cross Recessed Pan Head Wood Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 7996 Cross Recessed Pan Head Wood Screws), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for din 7996 cross recessed pan head wood screws is 10,000 pieces (applies to the standard sizes and finishes for din 7996 cross recessed pan head wood screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 7996 cross recessed pan head wood screws run 3–7 days. Quantities or variants of din 7996 cross recessed pan head wood screws outside the standard range are confirmed at quotation.
Storage & shipping
DIN 7996 Cross Recessed Pan Head Wood Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 7996 cross recessed pan head wood screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
When does a wood screw need a pan head instead of countersunk?
When the load path wants the head on top of the joint, not inside it: a pan head bears its full dk circle on the surface (or on a bracket/hinge under it), clamps without a countersinking operation, and keeps full head section in soft timber where a csk rim would tear out. It is also the serviceable choice — pan heads take more driver slip-outs before the recess fails, and they can be removed and re-driven without enlarging a csk. Use countersunk when the surface must be flush or the head is in the wear path; use DIN 7996 when you can accept the dome and want the simpler, stronger-on-the-surface joint.
What do the type H and type Zi columns mean?
They are the two cross-recess driver systems the standard prints depth data for: type H is the Phillips geometry, type Zi the Pozidriv — the m columns give the approximate recess depth per driver type per size (e.g. ≈2.9 vs 2.4 at size 3). The recess is cut to accept both, but they are not interchangeable tools: a Phillips driver rocks in a Zi recess and cambs out under torque, a Pozi driver in an H recess seats too deep and destroys it. Production should pick one system and tool the line for it — the registered recess depths let you match driver rails to screw size; tell us which system your line runs and volume is supplied inspected to that recess.
What is the MOQ and lead time for DIN 7996 Cross Recessed Pan Head Wood Screws?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 7996 Cross Recessed Pan Head Wood Screws state?
State the full designation (DIN 7996 Cross Recessed Pan Head Wood Screws), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 7996 Cross Recessed Pan Head Wood Screws inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your DIN 7996 Cross Recessed Pan Head Wood Screws
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support