DIN 792 Cylindrical Countersunk Screws with Nib (M24 – M42)
DIN 792 cylindrical countersunk screws with nib — large-size hex-socket flat-head screws with a anti-rotation nose on the cylindrical head, head attributes dk/k/t/f/b dimensioned M24 to M42 (dk 38 to 68, nose length t 12,1 to 22,6), for heavy locating joints where the head must not spin under torque.
Last updated: 2026-11
Specifications
DIN 792 is the large-section member of the cylindrical (low-head) socket screw family, and its defining feature is in the source table title: the "nib" — a small projecting nose on the head's bearing face that seats into a matching recess in the mating part and stops the screw turning while the mating nut is torqued, which is why the part shows up on heavy locating joints, press tooling and fixture plates where a spinning head would wreck the seating or shift the setting. The collected grid covers the six tabulated large sizes M24, M30, M33, M36, M39 and M42 with five head/shank attributes: head diameter dk (38 to 68), head height k (25 to 40), nose length t (12,1 to 22,6, decimal commas verbatim), nib width f (6,6 to 8,6) and minimum thread length b (54 to 90). Reading notes before engineering use: the grid starts at M24 — there is no small-size ladder on this page, so a DIN 792 call below M24 is a standard-document or quotation item, not something this reference tabulates; the k ladder prints duplicate adjacent values (30 at M30 and M33, 40 at M39 and M42) as the source prints them; and the makings line reads "Steel: negotiated" — an unusual print this page carries verbatim rather than turning into a class claim. Bolt length is a per-order dimension: the legend defines d but prints no length ladder.
| Standard / scope | DIN 792 cylindrical countersunk screws (source title as printed); table title prints "Sizes and features countersunk bolts cylindrical head nib DIN 792" (sic) |
|---|---|
| Threads | six tabulated large sizes: M24, M30, M33, M36, M39, M42 — the grid has no small-size ladder |
| Head diameter (dk) | 38 / 48 / 52 / 58 / 62 / 68 (M24 → M42) |
| Head height (k) | 25 / 30 / 30 / 35 / 40 / 40 — duplicate adjacent values (M30=M33, M39=M42) as printed |
| Nose (t) / nib (f) | nose length t 12,1 to 22,6 (decimal commas verbatim); nib width f 6,6 / 6,6 / 7,6 / 8,6 / 8,6 / 8,6 |
| Min. thread length (b) | 54 / 66 / 72 / 78 / 84 / 90 (M24 → M42) |
| Materials / thread (as printed) | Steel: negotiated; Thread: 6g; Stainless: -; Plastic: -; Non Ferrous: - (source makings block verbatim — "negotiated" carried, not turned into a class claim) |
| Not tabulated | No bolt-length ladder, no finishes, no property classes, no equivalents line printed on the source page — length is a per-order RFQ dimension |
| Attribute | M24 | M30 | M33 | M36 | M39 | M42 |
|---|---|---|---|---|---|---|
| dk | 38 | 48 | 52 | 58 | 62 | 68 |
| k | 25 | 30 | 30 | 35 | 40 | 40 |
| t | 12,1 | 15,6 | 16,4 | 18,2 | 19,9 | 22,6 |
| f | 6,6 | 6,6 | 7,6 | 8,6 | 8,6 | 8,6 |
| b | 54 | 66 | 72 | 78 | 84 | 90 |
- the source grid starts at M24 — no small-size ladder is printed; sizes below M24 are not claimed on this page.
- the k row prints duplicate adjacent values (30 at M30 and M33; 40 at M39 and M42) and the f row repeats 6,6/6,6 and 8,6/8,6 — as captured, kept verbatim.
- the source makings line reads "Steel: negotiated" — no default steel grade is claimed; the legend's d (nominal diameter) has a header column but no bolt-length ladder is tabulated.
Materials
- The source makings block prints "Steel: negotiated" — literally no default steel grade is claimed, which matches how large cylindrical-head screws are actually bought: at M24-M42 the property class and heat treatment are specified per order against the joint design, not read off a catalogue line. This page therefore makes no material claim beyond what is printed; state thread size and length, the property class your design requires, the thread tolerance (source prints 6g) and quantity per size. Stainless, non-ferrous or coated versions (the source prints "-" for all three) and any size below M24 are confirmed at quotation.
Ordering & documentation
Documents
Shipments of DIN 792 Cylindrical Countersunk Screws with Nib (M24 – M42) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 792 Cylindrical Countersunk Screws with Nib (M24 – M42) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 792 Cylindrical Countersunk Screws with Nib (M24 – M42)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for din 792 cylindrical countersunk screws with nib (m24 – m42) is 10,000 pieces (applies to the standard sizes and finishes for din 792 cylindrical countersunk screws with nib (m24 – m42); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 792 cylindrical countersunk screws with nib (m24 – m42) run 3–7 days. Quantities or variants of din 792 cylindrical countersunk screws with nib (m24 – m42) outside the standard range are confirmed at quotation.
Storage & shipping
DIN 792 Cylindrical Countersunk Screws with Nib (M24 – M42) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 792 cylindrical countersunk screws with nib (m24 – m42) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
What does the "nib" actually do — and when does it earn its place over a plain cylindrical head screw?
The nib (the f/t rows in the grid: width 6,6-8,6, length 12,1-22,6) is a small nose on the head's bearing face that engages a recess or hole edge in the mating part and mechanically stops the head from rotating. That matters exactly where a cylindrical head screw is used with a nut: you can hold the specified torque on the nut without the head spinning, without a second wrench fighting a low-profile head that offers little wrench access. Pick DIN 792 for locating joints, fixture plates and press tooling where the setting must not shift; if your joint has no recess or hole edge for the nose to seat in, the anti-rotation feature does nothing for you and a plain low-head socket screw is the simpler part. The nose also means the mating part needs the matching feature — check the f and t rows against your part drawing before quoting.
Why does the table start at M24 — is there no small-size DIN 792?
The source page tabulates only M24, M30, M33, M36, M39 and M42, and this page does not extend that ladder from outside the source. The cylindrical-head-with-nib pattern does exist in smaller sections in the standards literature, but nothing on the collected page states it, so a DIN 792 call below M24 is verified against the standard document (or quoted as a special) rather than read off this table. What the collected grid does fix for the large sizes is the complete head geometry chain — dk, k, t, f, b — which is what a die shop needs to cut the nose seat and what a buyer needs to check the head against a pocket drawing.
The makings line says "Steel: negotiated" — what am I supposed to specify?
Exactly what the source says: the steel grade is a negotiation, i.e. an order-line decision, not a catalogue default. In practice that means your RFQ carries the property class (e.g. 8.8 or 10.9) and any certificate requirement explicitly, matched to the joint design, and the supplier confirms against a test certificate. This page carries the "negotiated" print verbatim rather than substituting a conventional class, because at M24-M42 the wrong default is expensive: a class-5.8 large-format screw in a load-sized-tight joint fails quietly. Thread tolerance is printed (6g), so state it if the mating nut standard needs it matched.
What should an RFQ for DIN 792 screws state?
Thread size (M24-M42 from the ladder) and length as a pair (length is not tabulated — your drawing's call), the property class and certificate requirement that the "negotiated" makings line implies, the nib seat check (f/t against the mating part's recess), thread tolerance 6g if it needs stating, quantity per size — and any finish (the source prints none). Sizes below M24, stainless or coated versions, and length/thread pairs outside the standard ladder are confirmed at quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 792 Cylindrical Countersunk Screws with Nib (M24 – M42) inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your DIN 792 Cylindrical Countersunk Screws with Nib (M24 – M42)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support